These videos demonstrate common setup screens for MY18 and newer John Deere sprayers. While some screen layouts may vary by model year and options, they provide a useful guide for making settings changes in the display.
ExactApply Setup
Assign nozzles to turret positions, choose spraying nozzle (A, B, or combined), enable auto pulsing, and adjust target pressure. The “Auto Mode Setup” button on the configuration page is for conventional spraying only. Note: Ensure all boom nozzle positions match the display settings.
Spray Rate Setup
Learn how to preset spray rates and use the flow recommendation tool to find the correct valve configuration. Note: Ensure the physical valve configuration matches what is set on the display.
Tank Alarm and Agitation Setup
Shows how to set tank fill presets, low tank alarms, and use target fill. Also covers adjusting agitation and auto-off when tank levels drop below a threshold.
Rinsing Screen
Access different rinse options or transfer water from the rinse tank to the solution tank.
Hydraulic Tread Adjust
Set different width presets or slide the wheels in and out. Note: You will need to be moving to adjust the wheel spacing.
BoomTrac Pro 2 Setup
Access and change different settings on BoomTrac Pro 2. The BoomTrac Pro page on MY18-21 sprayers will not have all of the same settings as shown in this video but is similar.