
WC12 SERIES
Attachments Accessories And Implements
- Pull-type unit with drawbar
- Adjustable discharge chute
- Reversible, hydraulic feed roll
Features
The discharge chute rotates 360 degrees for fast and easy positioning.
The chute also features an adjustable deflector to accurately direct the wood chips to the desired location.
The hydraulic feedroll is mounted on a spring-loaded frame on the WC12 Series Wood Chippers, allowing it to raise up and down depending on the size of the timber going through.
The speed of the feedroll can be adjusted on the side of the wood chipper with the hydraulic flow valve.
Engagement of the feedroll is done by pushing or pulling the handle that wraps around the outside of the feed box. The feedroll has three positions: neutral, reverse, feed (forward).
The feedroll grabs the material as it is fed into the chipper and allows the operator to step away while it automatically pulls material into the knives.
This factory-installed, self-contained hydraulic kit is for tractors with less than 22.7 L/min (6 gpm) of hydraulic capacity or with no available rear selective control valves (SCVs). The kit contains a hydraulic reservoir and power take-off (PTO) driven hydraulic pump.
Specs & Compare
Dimensions | Current Model |
| Chip opening | 229x406 mm 9x16 in. |
| Hopper opening | 711x1067 mm 28x42 in. |
Feed options | |
| System | Hydraulic |
| Feed_x001A_roller diameter | 393.7 mm 15.5 in. |
| Hopper height | 68.6 cm 27.5 in. |
Chip chute | |
| Fixed | |
| Adjustable | Rotation: 360 degree (angle) |
Weights | |
| Unit | 1161.2 kg 2560 lb |
| Rotor style | Drum |
| Rotor | 222.3 kg 490 lb |
Tractor compatibility | |
| PTO rpm | 540 rpm |
| HP range (Tractor PTO hp) | 56-86 kW 75-115 hp |
3-Point hitch | |
| Category | Pull-type |
| iMatch™ or Quik-Coupler | |
Hydraulics | |
| Requirements | 30.3 L/min 8 gpm |
| Self-contained system | Optional |
Chipping | |
| Knife quantity | Two |
| Knife size | 1.59x11.43x22.86 mm 0.625x4.5x9 in. |
| Knife bolt | Gr 8 hex head bolts: 15.9 mm 0.625 in. |
| Shear bar | A8 Hardened Anvil |
| Rotor rpm | 2050 rpm |
Belt drive system | |
| Number | Five |
| Type | B-7 banded belt |
Set-up time | |
Warranty | |
Additional information | |
Offers & Discounts
0% APR/ACR for 36 Months1
on New Frontier Implements
- 0% APR/ACR for 36 months1 OR
- 0% APR/ACR for 24 months2
- Offer available 03 February 2026 through 30 April 2026
1Credit offer valid from 03 February 2026 through 30 April 2026. 0.0% purchase financing for 36 months on new Frontier Implements. Down payment may be required. Representative Amount Financed (''RAF''): $50,000, at 0.0% APR/ACR, payment is $1,388.89 for 36 months, total obligation is $50,000.00, credit charges/cost of borrowing based on RAF is $82. Monthly payments/credit charges/cost of borrowing will vary depending on amount borrowed/down payment. MSRP cash price is $63,125.00 based on highest priced product in series as of December 2025 (includes estimated charges for delivery $150, freight $6,075, and set up of $300 and a $100 documentation fee), plus taxes. Minimum finance amount may be required; representative amount does not guarantee offer applies. The charge for amounts past due is 24% per annum. Dealers free to set individual prices. Additional dealer fees may apply. Financing on approved John Deere Financial credit only. See dealer for details. May not be combined with other offers. Discounts or other incentives may be available for cash purchases. By selecting the purchase financing offer, consumers may be foregoing such discounts and incentives which may result in a higher effective interest rate.
2Credit offer valid from 03 February 2026 through 30 April 2026. 0.0% purchase financing for 24 months on new Frontier Implements. Down payment may be required. Representative Amount Financed (''RAF''): $50,000, at 0.0% APR/ACR, payment is $2,083.33 for 24 months, total obligation is $50,000.00, credit charges/cost of borrowing based on RAF is $84. Monthly payments/credit charges/cost of borrowing will vary depending on amount borrowed/down payment. MSRP cash price is $63,125.00 based on highest priced product in series as of December 2025 (includes estimated charges for delivery $150, freight $6,075, and set up of $300 and a $100 documentation fee), plus taxes. Minimum finance amount may be required; representative amount does not guarantee offer applies. The charge for amounts past due is 24% per annum. Dealers free to set individual prices. Additional dealer fees may apply. Financing on approved John Deere Financial credit only. See dealer for details. May not be combined with other offers. Discounts or other incentives may be available for cash purchases. By selecting the purchase financing offer, consumers may be foregoing such discounts and incentives which may result in a higher effective interest rate.