TR20 OVERSEEDER

The TR2058 Overseeder has a straight blade aerator rotor that aerates the soil and incorporates the seed all in one step.

The TR2058 Overseeder has rear cultipacker rings that compact and level the turf to ensure successful germination.

By adding the front gauge roller onto the TR2058 Overseeder, the operator can level the ground and control the seed depth. This is recommended for rental operations.

NOTE: Gauge wheels and the front roller cannot be used together.

The optional scraper bar on the TR2058 Overseeder is ideal for clay or wet conditions.

By simply unbolting the double flanges at each end of the aeration rotor, operators can install the optional tiller rotor. This transforms the TR2058 Overseeder Aerator into a primary seedbed preparation machine.

The field conversion gauge wheel kit for the TR2058 Overseeder includes two wheels and arms that can be set to ride on the wheels, so when lowered, they prevent the overseeder from lowering too far.

The first attachment is a field-installed front roller kit to compact soil for the aeration rotor.

The second attachment is a field-installed tilling roller kit to assist in preparing new seedbeds.

The third attachment is a rear roller scraper to keep material from kicking over the backside of the roller, leaving a smooth, finished job.