Cab
Cab Door Panel-Camouflage - 57K7MBUC11017
Camo cab panel
The camo cab panel enhances vehicle styling with an accent panel for the cab door (sold separately).
Cab Rear Panel - 57K7MBUC11309
Cab door color panel (green) - 57K7MBUC11110
Green and yellow cab panel
The green and yellow cab color panel enhances vehicle styling with an accent panel for the cab door (sold separately).
Cab door color panel (olive) - 57K7MBM26387
Olive cab color panel
Key features
- Enhances the vehicle styling with an accent color panel for the cab door (sold separately)
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Canvas cab rear panel - 57K7MBM25997
Canvas rear panel (shown with poly roof and canvas doors – sold separately)
Key features
- Made from premium, heavy-duty, 600 denier-solution dyed, water-resistant, UV-stabilized polyester for mold and tear resistance
- Durable, polyvinyl chloride (PVC) rear window resists yellowing or cracking. Window opens easily with a zipper and can be secured in place with straps.
- Helps keep dust out of the operator station when installed with a full windshield
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Compatible with the following cab components:
- Cab doors – both poly and canvas
- Poly roof
- Full poly windshield
- Glass windshield
Door Kit - 57K7MBUC11195
Door Kit, DOOR KIT, HDUV CAB - 57K7MBUC11481
Door Kit, Soft - 57K7MBUC10928
Canvas cab doors (shown with poly roof, canvas rear panel, and glass windshield – sold separately)
Canvas cab doors (shown with poly roof, canvas rear panel, and glass windshield – sold separately)
Key features
- Made from premium, heavy-duty, 600 denier-solution dyed, water-resistant, UV-stabilized polyester for mold and tear resistance
- Durable, polyvinyl chloride (PVC) windows resist yellowing or cracking. Windows opens easily with a zipper and can be secured in place with straps.
- Lower PVC window for enhanced visibility
Compatibility information
- Model year 2018 and newer XUV835 and XUV865 Utility Vehicles
- Compatible with the following cab components:
- Poly roof
- Canvas roof and rear panel
- Canvas rear panel
- Cab rear panel
- Full poly windshield
- Glass windshield
Half Door - 57K7MBUC10808
Vehicle with half doors
Half doors are a choice on the XUV835 and XUV865 Utility Vehicles:
- One-handed operation
- Interior latch for opening
- Armrest for comfort
- Color-matched exterior decal based on the color of the unit
- Available only on open station units
The OSR doors kit is a replacement kit for the factory-installed OSR doors or can be installed on vehicles that had the OSR nets installed from the factory. These OSR half doors can only be installed on model year 2018 and newer Gator™ XUV835 and XUV865 Utility Vehicles.Model year 2019 and older vehicles also require:
- UC20514 left-hand A-post cover
- UC20515 right-hand A-post cover
The OSR color accents are sold separately and can be installed on the OSR doors.
Left side yellow decal label - 57K7MUC13523
Green and yellow cab color panel
Key features
- Enhances the vehicle styling with an accent color panel for the cab door (sold separately)
- Must order right and left side yellow decal labels to complete panel styling
- Left label: UC13523
- Right label: UC13524
- Reference CCMS solution 111866 for details on installation and alignment of color label.
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Right side yellow decal label - 57K7MUC13524
Green and yellow cab color panel
Key features
- Enhances the vehicle styling with an accent color panel for the cab door (sold separately)
- Must order right and left side yellow decal labels to complete panel styling
- Left label: UC13523
- Right label: UC13524
- Reference CCMS solution 111866 for details on installation and alignment of color label.
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Cargo Box
19 L (5 gal) Pail Holder - 57K7MBM23849
Cargo box pail holder
Cargo box pail holder
The 5-gal. (18.9-L) pail holder is ideal for operators who want to maximize the work capability of their Gator™ Utility Vehicle. The 5-gal. (18.9-L) pail holder keeps pails in place within the cargo box, ensuring that they stay safe and secure. Featuring the quick-clamp mounting system, it mounts easily to the cargo rails of the cargo box with just one clamp.
Cargo Bed Extender - 57K7MBM25700
Cargo bed extender
Cargo bed extender
The cargo bed extender conveniently extends the rear of the cargo bed, and also acts as a cargo box divider when it is flipped inside of the cargo box. The cargo bed extender easily flips in or out with the use of quick-pull pins.
Cargo Box Bed Mat - 57K7MBM22772
Deluxe cargo box bed mat
The deluxe cargo box bed mat not only protects the steel floor from scratches and dents, it also provides additional cushioning and slip resistance to items being hauled in the cargo box.
Cargo Box Divider - 57K7MBM22769
Cargo Box Side Extension Kit - 57K7MBM24901
Cargo box side extension kit
The cargo box side extension kit expands the versatility of the Gator™ Utility Vehicles and is ideal for those who are enhancing their property and landscape. The extensions allow operators to haul twice the volume (not to exceed cargo box weight capacity) of light material such as grass clippings and mulch.
Product features include:
- Four-sided structure that increases cargo box side height to 533 mm (21 in.) and volume to 0.74 m3 (26 cu ft)
- Mounted on the sides and front with hardware, while the tailgate can be attached or removed without tools
- Tailgate pivots at the top (similar to a dump truck) for ease of dumping loose material
- Laser-cut, heavy-gauge, powdered-coated steel provides excellent durability
- Compatible with all model year 2011 to current Gator XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, and M-Gator A2 Utility Vehicles
- Compatible with model year 2010 to current Gator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
- Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles.
- Compatible with Gator cabs and bedliner
NOTE: The cargo box side extensions are not intended to increase the rated cargo box carrying capacity per the vehicle specification.
Rear Fender Flare - 57K7MBUC10567
Rear fender flare kit on XUV865
Rear fender flare kit
A – Fender flare
B – Fender
The rear fender flare kit minimizes debris from reaching the operator station.
Product features include:
- Two pliable fender flares (one for each side)
- Hardware for mounting on the sides
- Compatible with all model year 2011 to current Gator™ XUV825, XUV825 S4, XUV855, XUV855 S4, XUV835, and XUV865 Utility Vehicles
- Compatible with model year 2010 to current Gator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
- Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles
Rear Fender Flare - 57K7MBUC11375
Rear fender flare
Overview
Rear fender flares reduce mud and debris splashing onto the vehicle and passengers. The flares are constructed from a durable molded material and integrated into the cargo box fenders. The attachment kit includes a pair of flares and mounting hardware.
Compatibility
XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, XUV865R vehicles. Signature Edition vehicles include rear fender flares in base equipment.
Side Tool Rack - 57K7MBM22775
Spare Tire Carrier - 57K7MBM25577
Spare tire carrier
Spare tire carrier
Easily mount a spare tire to the side of the cargo box with this convenient kit.
Recommended to carry spare front tire, as the front tire can be mounted on either the front or rear hubs.
Cover
High Performance Sport Seat Cover - Black - 57K7MLP66156
High-performance sport seat cover - black
High-performance sport seat cover - camo
High-performance sport seat cover - coyote
Each kit (available through Order Zone) contains one bench base cover, one backrest cover, and installation instructions.
NOTE: One carton (two kits) outfits driver and passenger seats.
Special features:
- Exceptional abrasion, tear, and puncture resistance
- Constructed with military-grade CORDURA® fabrics
- Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
- Quick and easy installation
- Available in black or Realtree Hardwoods HD® pattern
- Military-grade zippers
- Limited 1-year warranty
- Made in the USA
Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd. CORDURA is a trademark of INVISTA North America, LLC.
High Performance Sport Seat Cover - Camo - 57K7MLP66157
High-performance sport seat cover - black
High-performance sport seat cover - camo
High-performance sport seat cover - coyote
Each kit (available through Order Zone) contains one bench base cover, one backrest cover, and installation instructions.
NOTE: One carton (two kits) outfits driver and passenger seats.
Special features:
- Exceptional abrasion, tear, and puncture resistance
- Constructed with military-grade CORDURA® fabrics
- Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
- Quick and easy installation
- Available in black or Realtree Hardwoods HD® pattern
- Military-grade zippers
- Limited 1-year warranty
- Made in the USA
Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd. CORDURA is a trademark of INVISTA North America, LLC.
High Performance Sport Seat – Coyote - 57K7MLP66163
High-performance sport seat cover - black
High-performance sport seat cover - camo
High-performance sport seat cover - coyote
Each kit (available through Order Zone) contains one bench base cover, one backrest cover, and installation instructions.
NOTE: One carton (two kits) outfits driver and passenger seats.
Special features:
- Exceptional abrasion, tear, and puncture resistance
- Constructed with military-grade CORDURA® fabrics
- Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
- Quick and easy installation
- Available in black or Realtree Hardwoods HD® pattern
- Military-grade zippers
- Limited 1-year warranty
- Made in the USA
Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd. CORDURA is a trademark of INVISTA North America, LLC.
ROPS, KIT, ENCORE - 57K7MBUC11640
Vehicle storage cover - 57K7MLP68148
Vehicle storage cover
Vehicle storage cover
Key features
- All-season protection against sun damage, rain, dust, and tree sap
- Reinforced corners for added durability
- Fabric coated for maximum water resistance and repellency
- Elastic shock cord in bottom hem for a quick, custom fit
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information
Available through Order Zone
Guards
Brushguard - 57K7MBUC10679
Brushguard extensions - 57K7MBUC10141
Cargo Box Fender Guard - 57K7MBUC11320
Constant-Velocity (CV) Guards Front and Rear Kit - 57K7MBUC10761
Front CV guards
Rear CV guards
Key features
- Kit contains both front and rear CV guards
- Additional added protection for the A-arms and CV joints
- High-strength, formed steel guards handle impacts while maintaining a low, unsprung mass to provide exceptional ride quality
- Easily bolts to the A-arms
- Drainage holes on the bottom of the guards prevent buildup of dirt, grass, and other loose materials
Compatibility
- Model year 2020 and newer XUV835 and XUV865 Utility Vehicles
Front Fender Guard - 57K7MBUC10247
Front fender guards - shown with brush guard (required) and brush guard extensions (optional)
Key features
- Easily attaches to the brush guard (required – sold separately)
- Provides protection to the front fender area
- NOTE: With fender guards installed, the overall width of the vehicle increases to 1.75 m (69 in.).
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Rear Bumper - 57K7MBM22767
Rear bumper kit (TH 6X4 shown)
The rear bumper offers stylish, heavy-duty rear protection to the vehicle.
Compatible with:
- Model year 2011 and later Gator™ XUV 625i, XUV 825, and XUV 855 Utility Vehicles
- Model year 2010 and later Gator TX, TX Turf, TH 6X4 Gas, TH 6X4 Diesel, and TE Utility Vehicles
- Model year 2018 and later Gator XUV835 and XUV865 Utility Vehicles
Rear CV Guards - 57K7MBUC10605
Rear CV guards
CV guards add additional protection for the A-arms, brake lines, and CV half shafts:
- Formed steel guards handle impacts while maintaining a low unsprung mass
- Easily bolt to the A-arms with six bolts
- Drainage holes provided to prevent buildup of dirt, grass, and other loose materials
- Compatible with all model year 2011 to current Gator™ XUV625i, XUV825, XUV855, and M-Gator A2 Utility Vehicles
- Compatible with model year 2013 to current Gator XUV825 S4 and XUV855 S4 Utility Vehicles
- Compatible with model year 2018 to current Gator XUV835 and XUV865 Utility Vehicles
Rear metal screen - 57K7MBUC10281
Rear screen
Key features
- Provides additional protection to the operator and passengers
- NOTE: Never carry loads in the cargo box over the load guard.
- Perforated, black metal screen easily attaches to the occupant protective structure (OPS)
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Not compatible with cab rear panel
Rear panel glass protector - 57K7MBUC10245
Rear-panel glass protector
Key features
- Provides protection to the cab rear-panel glass
- NOTE: Never carry loads in the cargo box over the load guard.
- Perforated, black metal screen easily attaches to the cab rear panel (required – sold separately)
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Tail Light Protectors - 57K7MBM22773
Brake and taillight protector
The brake and taillight protector offers increased protection to the taillight assembly from incidental contact.
Harnesses
CAN Bridge Control Kit - 57K7MBUC10811
Front Attachment Harness - 57K7MBUC10809
Front attachment harness
The front attachment harness includes connections for the following kits:
- Light-emitting diode (LED) headlights
- Turn signals
- Horn
- Brush-guard-mounted auxiliary lights
Front Attachment Harness (dash port) - 57K7MBM26268
Dash port harness connection
Dash port harness – lower connectors
Key features
- The front attachment harness (dash port) includes connections for the following kits:
- Rear sprayer
- Rear spreader
- Blades
- GreenStar™ Display as part of the Ag Management Solutions (AMS) integration kit
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Front Cab Attachment Harness - 57K7MBM26740
Front cab attachment harness
Key features
- The front cab attachment harness includes connections for the following kits:
- Front auxiliary lights
- Windshield wiper
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Hydraulic Blade and Winch Harness Kit - 57K7MBUC10604
Hydraulic blade and rear winch harness
Key features:
- The hydraulic blade and winch harness includes connections for the following kits:
Compatibility:
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Rear Cab Attachment Harness - 57K7MBM26739
Rear cab attachment harness
Key features
- The rear cab attachment harness includes connections for the following kits:
- Rear auxiliary lights
- Beacon light
- Ag Management Solutions (AMS) receiver harness
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Roof Attachment Harness - 57K7MBM26267
Roof attachment harness
Key features
- The roof attachment harness includes connections for the following kits:
- Front cab attachment harness
- Rear cab attachment harness
- Upper speakers for premium stereo kit
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Lighting
Beacon Light - 57K7MBM26185
Beacon light in up position
Beacon light in down position
Backlit beacon light switch
Key features
- 76-mm (3-in.) round, light-emitting diode (LED) strobe light provides excellent visibility for vehicle bystanders
- Especially useful for working around properties and job sites
- Acrylic amber lens resists scratching and scuffing
- Impact-resistant nylon housing
- Society of Automotive Engineers (SAE) J845 (Class 3)-compliant
- UL® recognized
- Flash rate: 60 +/- 10 fpm
- Stands 21.3-cm (8.4-in.) tall from roof/occupant protective structure (OPS)
- Folds down out the way when not in use
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements
XUV835/865 |
Attachment harness required (see below) |
E |
1, 3, 5 |
M (open station) |
3, 5 |
M (cab, factory installed) |
5 |
R |
--- |
1 |
E-spec attachment harness |
2 |
Front attachment harness |
3 |
Roof attachments harness |
4 |
Front cab harness |
5 |
Rear cab harness |
6 |
Dash port harness |
UL is a trademark of UL LLC.
Dual Beam LED Headlights (2) - 57K7MBM26589
LED headlights
Three-position backlit light switch
Key features
- Upgrade from halogen headlights
- High/low beam
- Raw lumen output (per light): 1,075 (high beam), 430 (low beam)
- Effective lumen output (per light): 720 (high beam), 240 (low beam)
- Nominal LED color temperature: 5000 K
- Current draw: 1.14 amps (high beam), 0.41 amps (low beam)
Compatibility
- Model year 2018 and newer XUV835 and XUV865 Utility Vehicles
- Model year 2021 and newer XUV560E, XUV560E S4, XUV590E, XUV590E S4, XUV590M, and XUV590M S4 Utility Vehicles
Electrical harness requirements
XUV835/XUV865 |
Attachment harness required (see below) |
E |
1, 2 |
M (open station) |
2 |
M (cab, factory installed) |
2 |
1 |
E-spec attachment harness |
2 |
Front attachment harness |
3 |
Roof attachments harness |
4 |
Front cab harness |
5 |
Rear cab harness |
6 |
Dash port harness |
LED Driving Lights (2 Lights) - 57K7MBM26215
Front cab mounted
Rear cab mounted
Brush guard mounted
Key features
- The LED driving lights can be mounted on the front occupant protective structure (OPS), front cab, rear OPS, rear cab, or brush guard
- Beam pattern: driving (focused, intense beam of light good for illuminating a stretch of road directly in front of the vehicle)
Driving beam pattern – mounted on brush guard
Driving beam pattern – mounted on OPS/roof
- Lamp sealing: IP69K
- Light output (per light): 1150 lumens
- LED color temperature: 5000 K
- Amp draw (per light): 1.4 amps
- 6 LEDs per light
- Aluminum housing
Compatibility
- Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
- HPX Utility Vehicles
LED Single Beam Headlights - 57K7MBUC10876
LED Work Lights (2 Lights) - 57K7MBM26216
Front cab mounted
Rear cab mounted
Brush guard mounted
Key features
- The LED work lights can be mounted on the front occupant protective structure (OPS), front cab, rear OPS, rear cab, or brush guard
- Beam pattern: flood (spread of light over a wider, shorter distance)
Flood beam pattern – mounted on OPS/roof
- Lamp sealing: IP69K
- Light output (per light): 1200 lumens
- LED color temperature: 5000 K
- Amp draw (per light): 1.4 amps
- 6 LEDs per light
- Aluminum housing
Compatibility
- Model Year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
- Model Year 2018 to current XUV835 and XUV865 Utility Vehicles
- Model Year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
- HPX Utility Vehicles
Mirrors
Rear View Mirror - 57K7MBM26477
Rearview mirror
Key features
- Convex mirror reflects a wide-angle image to help the operator see behind the vehicle
- Connected to ball stud for easy adjustment
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Side Mirrors (open station & cab doors) - 57K7MBUC10310
Side Mirrors (open station & cab doors) - 57K7MBUC11227
Operator's Station
Accessory mount bracket - 57K7MBUC10176
Accessory mounting bracket (shown with tablet and cell phone mount)
Key features
- Allows the cell phone and tablet mount to be installed in the upper dash location
- Required for cell phone mount if mounted in the lower dash location
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Cell Phone Mount Kit - 57K7MBRE10015
Cell phones, global positioning system (GPS), and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator station.
RAM X-Grip holder
For proper machine operation, it is critical that accessory devices and tools be located and mounted where they are accessible but do not interfere with visibility and controls. The new RAM® mount kit has been specially developed to meet this need in John Deere tractors and now utility vehicles.
Simply remove the large wing nut from the assembly, insert the stud into any open hole in the occupant protective structure (OPS), and tighten down the jam nut.
Key benefits:
- Patented RAM X-Grip™ holder fits most cell phones and similar devices including iPod®, iPad®, iPhone®, BlackBerry®, Samsung Galaxy® and others.
- Mounts to the holes in the OPS
- Ball joints allow for variable positioning
- Holds firm even in rugged terrain
- The holder is compatible with many other RAM® products with their B size or 25.4-mm (1-in.) ball accessories
RAM X-Grip
The RAM X-Grip has a clean and clever four-leg design that sports great holding power without hiding the phone behind foam pads and plastic.
Features:
- Rustproof
- High-strength composite and stainless-steel construction
- Spring-loaded holder expands and contracts for custom fit
- Minimum width: 1.875 in. (47 mm)
- Maximum width: 3.25 in. (82 mm)
- Depth: 0.875 in. (22 mm)
- Rubber-coated tips will hold device firm and stable
- Easy access grip knobs for quick release of your device
Warranty:
90 days, limited.
RAM and RAM X-Grip are trademarks of National Products Inc. iPad, iPod, and iPhone are trademarks of Apple, Inc. BlackBerry is a trademark of Research In Motion Limited (RIM). Samsung Galaxy is a trademark of Samsung Electronics Co.
Sun Visors (2) - 57K7MBM26478
Visors (shown on R-spec)
Visors (shown on R-spec)
Key features
- Shades occupants from the glare of sunlight
- Hinged design
- Tan color
- Kit includes left and right visor. Rearview mirror kit required for installation.
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Tablet mount - 57K7MBUC10175
Tablet mount – upper mount location (shown with cell phone mount – sold separately)
Tablet mount – lower mount location (shown with cell phone mount – sold separately)
Key features
- Keeps tablet at the operator’s fingertips for doing jobs such as soil sampling
- Utilizes a RAM® mount to easily move tablet to desired location
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
RAM is a trademark of National Products, Inc.
Roof
Roof (Black) - 57K7MBUC11305
Roof Headliner - 57K7MBUC10550
Roof headliner
Roof headliner installation
Key features
- Enhances the appearance of the operator station with a molded, soft-touch, automotive-style roof headliner
- Made from 3.175-mm (1/8-in.) thick sound-dampening material for improved occupant comfort
- Easily attaches to the roof with cap screws and push darts
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Roof Seal Kit - 57K7MBUC10711
Seat
Bench seat cover (black) - 57K7MLP68162
Bench seat cover (shown in black)
Modular lightweight load-carrying equipment (MOLLE) attachment location
Overview
Bench seat covers are available for full-size Gator™ utility vehicles.
Benefits
- Protection for the bench seat from wear and stains
- Constructed with military-grade CORDURA® fabrics
- Quick and easy installation
- MOLLE attachment locations (MOLLE attachments available through Order Zone)
- Easy access to seatbelts
- Available in three color options: black, Realtree EDGE® camo, or coyote brown
Additional details
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information
Available through Order Zone.
CORDURA is a trademark of INVISTA North America, LLC. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
Bench seat cover (camo) - 57K7MLP68420
Bench seat cover (shown in black)
Modular lightweight load-carrying equipment (MOLLE) attachment location
Overview
Bench seat covers are available for full-size Gator™ utility vehicles.
Benefits
- Protection for the bench seat from wear and stains
- Constructed with military-grade CORDURA® fabrics
- Quick and easy installation
- MOLLE attachment locations (MOLLE attachments available through Order Zone)
- Easy access to seatbelts
- Available in three color options: black, Realtree EDGE® camo, or coyote brown
Additional details
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information
Available through Order Zone.
CORDURA is a trademark of INVISTA North America, LLC. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
Bench seat cover (yellow) - 57K7MLP68149
Bench seat cover
Key features
- Protection for the bench seat from wear and stains
- Elastic-hem cord closure for easy adjustment
- Easy access to seatbelts
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information
Available through Order Zone
HD XUV Bench Seat Cover-Coyote Brown - 57K7MLP73720
Bench seat cover (shown in black)
Modular lightweight load-carrying equipment (MOLLE) attachment location
Overview
Bench seat covers are available for full-size Gator™ utility vehicles.
Benefits
- Protection for the bench seat from wear and stains
- Constructed with military-grade CORDURA® fabrics
- Quick and easy installation
- MOLLE attachment locations (MOLLE attachments available through Order Zone)
- Easy access to seatbelts
- Available in three color options: black, Realtree EDGE® camo, or coyote brown
Additional details
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information
Available through Order Zone.
CORDURA is a trademark of INVISTA North America, LLC. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
Seat-Belt Comfort Strap (2) - 57K7MBM26583
Comfort straps
Kit includes two comfort straps for the left and right seat belts.
- Provides relief to the operator's and passenger's upper body when driving over rough terrain by allowing the seat belt to stretch when the seat belt locks
- Moves the upper mounting point of the seat belt down 6 in. (152 mm)
- Can be mounted to both the driver- and passenger-side upper mounting point of the three-point seat belt
- Compatible with all model year 2017 - current Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, and RSX860i Utility Vehicles when equipped with standard Occupant Protective Structure (OPS)
- Compatible only with standard Occupant Protective Structure (OPS), for deluxe cab frame, order BM22703
Sprayers
170.344 L (45 gal) Bed Sprayer - 57K7MLP20852
45-gal. (170-L) Gator bed sprayer
The 45-gal. (170-L) Gator bed sprayer is designed to work with the Gator vehicles equipped with the steel bed or deluxe cargo box. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 43-in. boom that sprays a 120-in. swath. It's equipped with a 20-ft hose and a spray wand for spot spraying lawns, shrubs, trees, etc. The fully adjustable brass spray wand tip achieves streams up to 30 ft. It comes equipped with rubber feet and custom brackets, which secure to the Gator bed, for a no tools mount.
Special features:
- 45-gal. (170-L) capacity
- Brackets secure to Gator bed, no tools or additional strapping required after initial set-up
- Brackets allow boom height adjustment
- 100 psi SHURflo diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage
- The fully adjustable brass spray wand tip achieves streams up to 30 ft
- Equipped with a 20-ft hand wand hose with side mount hose tender for convenience
- Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
- On/off switch located near operator
- Easy boom removal for added convenience
- Control valve channels spray to either the boom or spray wand
- 12-V plug included with wiring harness, complete with quick-disconnects, for convenient electrical hookup
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
Specifications
Capacity |
45 U.S. gal. (170 L) |
Pump |
Type |
Electric motor and diaphragm |
Manufacturer |
SHURflo® |
Operating pressure |
100 psi |
Current draw |
7 amp |
Valve material |
Viton® |
Diaphragm material |
Santoprene™ |
Spray flow rate |
2.1 U.S. gpm (8 L/min) |
Sump strainer |
Stainless steel |
Remote spray method |
Spray wand |
Polypropylene with Viton components |
Tip material |
Brass |
Adjustment |
Fan-to-stream |
Hose length |
20-ft nylon reinforced rubber |
Boom |
Boom width |
43-in. (109 cm) fixed |
Spray swath |
120-in. (305 cm) |
Spray tip(s) |
Three - TF-VP3 |
Mounting |
Steel bed |
Custom tailgate clamp mounting |
Deluxe cargo box |
Custom brackets secure to tie-downs |
Compatibility |
All Gator models except CX |
Shipping weight |
68 lb (31 kg) |
Net weight |
64 lb (29 kg) |
Ordering information
Contact the local John Deere dealer for availability and pricing information.
45-gal. (170-L) Gator bed sprayer
Order number: LP20852
SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.
170.344 L (45 gal) High Performance Sprayer - 57K7MLP22908
High-performance 45-gal. (170-L) Gator bed sprayer
The high-performance Gator bed sprayer is designed to work with Gator vehicles equipped with the deluxe cargo box or steel bed. With a 45-gal. (170-L) capacity, high volume electric pump, and premium pistol grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and de-icer. Engineered brackets secure the sprayer to the Gator bed with no tools, or additional tie-downs required.
NOTE: Sprayer shown above with optional 150-in. precision boom (LP22885).
High-performance features:
- 45 psi, 3.6 gpm SHURflo® diaphragm-type pump is designed for high hour applications and can be run dry without damage
- Premium pistol grip spray gun, designed for single hand mist to 35-ft stream
- Equipped with a 20-ft hand wand hose with side mount hose tender for convenience
- Glycerin-filled pressure gauge and TeeJet™ pressure regulation/recirculation valve
- Choice of booms (sold separately)
- On/off capabilities in the palm of your hand with the included sprayer remote control (LP22912)
- 12V plug included with wiring harness, complete with quick-disconnects, for convenient electrical hookup
- Brackets secure to Gator bed, no tools or additional strapping required after initial set-up
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
Specifications
Capacity |
45 U.S. gal. (170 L) |
Pump |
Type |
Electric motor and diaphragm |
Manufacturer |
SHURflo® |
Operating pressure |
45 psi |
Current draw |
7 amp |
Valve material |
Viton® |
Diaphragm material |
Santoprene™ |
Spray flow rate |
3.6 U.S. gpm (13.6 L/min) |
Sump strainer |
Stainless steel |
Remote spray method |
Spray wand |
Poly, alloy, and brass with Viton components |
Tip material |
Brass and stainless |
Adjustment |
Fan-to-stream |
Hose length |
20-ft - 1/2-in. nylon reinforced rubber |
Gauge |
Glycerin filled |
Spray control |
Pressure regulation/recirculation |
Remote control |
12V receiver with dual FOB remote on/off |
Boom (sold separately) |
Option 1 |
150-in. spray width precision folding (5 tip) |
Option 2 |
120-in. spray width (3 tip) |
Option 3 |
24-ft boomless nozzle |
Mounting |
Steel bed |
Custom tailgate clamp mounting |
Deluxe cargo box |
Custom brackets secure to tie-downs |
Compatibility |
All Gator models (except CX) |
Shipping weight |
56 lb (25 kg) |
Net weight |
52 lb (23 kg) |
Ordering information
Contact the local John Deere dealer for availability and pricing information.
High-performance 45-gal. (170-L) Gator bed sprayer
Order number: LP22908
SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.
90 Gallon High Performance Single Tank Sprayer - 57K7MLP48006
340.7-L (90-gal.) single tank sprayer
The high-performance (HP) single-tank 340.7-L (90-gal.) Gator bed sprayer is designed to work with Gator vehicles equipped with the deluxe cargo box that have a capacity in excess of 362.9 kg (800 lb). The custom molded 340.7-L (90-gal.) tank provides a low profile with capacity perfect for athletic fields, farmettes, commercial maintenance, or any large property. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. Custom engineered mounting hardware ensures the unit stays secure without the use of additional straps or tie-downs. Cover ground quickly with flexible boom options. (Boom sold separately).
High-performance features:
- 100 psi, 4-GPM diaphragm-type pump is designed for high-hour applications and can be run dry without damage
- Premium pistol grip spray gun, designed for single-hand mist to 10.7-m (35-ft) stream.
- Side-mount hose tender for easy hose access and storage
- Glycerin-filled pressure gauge
- TeeJet™ pressure regulation/recirculation valve for precise sprayer calibration
Additional features:
- Custom engineered brackets secure to Gator bed with no tools or additional straps
- Control valve channels spray to either the boom or spray wand
- Includes Gator accessory wiring harness, complete with quick disconnects, for convenient electrical hookup
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
90 Gallon Rate Control Sprayer - 57K7MLP68194
340.7-L (90-gal.) sprayer on XUV835
Overview
The 341-L (90-gal.) rate controlled sprayer for Gator™ utility vehicles is proof that the evolution of modern sprayers is correlated to progress in electronics and forward thinking. By utilizing pulse width modulation (PWM) technology, like the systems found on large-scale ag sprayers, this sprayer provides many of the same features and benefits to operators with XUV835 and XUV865 Full-Size Crossover Utility Vehicles.
Benefits
- Greater productivity due to faster travel while spraying
- Easier adjustments through advanced controls using the 8.1-cm (3.2-in.) display
- Savings on chemical costs thanks to more consistent application rate
- Lower risk of environmental contamination because of precision spray rate
Additional details
With this sprayer, operators effortlessly maintain their application rate without needing to hold a constant ground speed. For example, if the operator slows down to maneuver around an obstacle, the solenoid valves on the sprayer tips compensate by decreasing the rate of material being applied. If the operator stops the vehicle, the solenoid valves shut the tips off completely and the spray returns to the tank through a return valve. This precise measuring of the Gator utility vehicle’s speed is done through a controller area network (CAN) bridge (BUC10316), which provides instantaneous communication between the sprayer and the vehicle.
For simple operation, an 8.1-cm (3.2-in.) display mounts to the vehicle’s dash. This display allows operators to easily select a spray mode (boom or wand), adjust the speed range, tip size, and flow rate, and individually activate or deactivate tips for more application options. After setup, the minimum and maximum speed ranges are shown as a horizontal meter to help the operator avoid traveling too fast or too slow based on their set parameters.
Partnering with this technology is a proven 20-L/min (5.3-gpm) Shurflo® pump that provides up to 4.1 bar (60 psi). Material is applied as wide as 3.8 m (12.5 ft) with a durable, spring-loaded folding steel boom. Also included is a deluxe hand wand with a brass tip that provides both cone and stream spray patterns. Attached to the wand is 9.1 m (30 ft) of hose that is ideal for spot spraying weeds as far 10.7-m (35-ft) away and trees up to 9.1-m (30-ft) high.
Key features
- Rate control technology – allows operators to effortlessly hold their application rate without worrying about maintaining exact ground speed.
- 8.1-cm (3.2-in.) display – provides operators with the ability to select a spray mode (boom or wand), adjustments to the speed range, tip size, and flow rate, and individually activate or deactivate tips for greater application options.
- Pressure control through return valve – helps maintain the droplet size defined by the spray tip, which is important as some materials require different droplet sizes.
- Individual tip shutoff – provides greater options for different spraying applications.
- Shurflo 20-L/min (5.3-gpm) pump – is designed for high-hour commercial applications and provides up to 4.1 bar (60 psi) on demand.
- Spring-loaded, folding steel boom – applies up to 3.8-m (12.5-ft) spray swath. Five XRC TeeJet® nozzles are used to prevent dripping that can lead to spotting.
- Adjustable hand wand – features a brass tip with a spray pattern that can be adjusted from cone to stream, perfect for spraying trees, weeds, and hard-to-reach places.
Compatibility
- Model year 2018 and newer Gator XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R Full-Size Crossover Utility Vehicles
Specifications
Tank |
Material |
Blow-molded yellow polyethylene plastic |
Lid |
12.7-cm (5-in.) plastic screw-on breathable lid with tether |
Fill-level indication |
Molded on tank (in gallons) |
Recirculation |
Yes - through tank |
Sump |
Yes - molded in bottom of tank |
Drain |
No drain |
Pump |
Type |
Shurflo on-demand diaphragm-type pump |
Pressure |
0 to 4.1 bar (0 to 60 psi) – adjustable through recirculation |
Flow rate |
20 L/min (5.3 gpm) |
Electrical |
18 amps max |
Boom |
Material |
Powder-coated steel |
Type |
Manually-folded, spring-loaded breakaway boom |
Nozzles |
XRC TeeJet nozzles with check valve screens |
–Folded width |
1.5 m (5 ft) |
–Unfolded width |
3 m (10 ft) |
Spray width |
3.8 m (12.5 ft) |
Hand wand |
Material |
Polypropylene with Viton® rubber seals |
Tip |
Brass - adjustable (mist, cone, stream) |
Hose diameter |
1.3 cm (1/2 in.) |
Hose length |
9.1 m (30 ft) |
Vertical spray distribution |
9.1 m (30 ft) |
Horizontal spray distribution |
10.7 m (35 ft) |
Frame |
Material |
Powder-coated steel |
Capacities |
Tank capacity |
341 L (90 gal.) |
Weight - tank empty |
65 kg (143 lb) |
Weight - tank full |
380 kg (839 lb) |
Warranty |
Residential |
2 years |
Commercial |
6 months |
Components included
- 341-L (90-gal.) sprayer assembly
- 3.8-m (12.5-ft) boom and support components
- 9.1-m (30-ft) deluxe hand wand
- Controller and mounting plate
- 8.1-cm (3.2-in.) display
- Display mounting bracket
- Dash, chassis, and sprayer harnesses
- Hardware
- Operator's manual
Required John Deere parts
- E-Spec Full-Size Crossover Gator Utility Vehicles (XUV835E and XUV865E)
- Dash port attachment harness (BM26268)
- E-Spec attachment harness (BM26266)
- CAN bridge (BUC10316)
- M-Spec Full-Size Crossover Gator Utility Vehicles (XUV835M and XUV865M)
- Dash port attachment harness (BM26268)
- CAN bridge (BUC10316)
- R-Spec Full-Size Crossover Gator Utility Vehicles (XUV835R and XUV865R)
- Dash port attachment harness (BM26268)
- CAN bridge (BUC10316)
- Shurflo is a trademark of Pentair Flow Technologies, LLC. TeeJee is a trademark of Spraying Systems Co. Viton is a trademark of The Chemours Company FC, LLC.
Sprayer Conversion Kit - 57K7MLP68195
Sprayer wiring kit components
Overview
This sprayer wiring kit provides plug-and-go functionality for customers with Full-Size Crossover Gator Utility Vehicles with deluxe cargo boxes and compatible sprayers. Instead of connecting a sprayer's wiring directly to the battery, this kit utilizes the vehicle's pre-installed wiring for a cleaner initial installation and simplified routine attachment afterwards.
Benefits
- Plug-and-go compatibility utilizing the vehicle's pre-installed wiring instead of connecting directly to the battery
- Convenient dash-mounted switch puts on/off control of a sprayer within short reach
Additional details
Included with each kit are four harnesses. Two (the upper and lower harnesses) are for the on/off rocker switch, which can be installed in one of the blank switch plates on the vehicle's dash. The chassis harness runs along the rear of the chassis, extending power and data ports to the back corner of the vehicle. Lastly, the sprayer harness connects to the chassis harness and runs to the sprayer pump, providing a clean and tidy wiring solution.
Compatibility
- Model year 2018 and newer Gator XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R Full-Size Crossover Utility Vehicles
- Sprayers:
- LP33597 – 94.6-L (25-gal.) sprayer for Gator utility vehicles
- LP20852 – 170.3-L (45-gal.) sprayer for Gator utility vehicles
- LP22908 – 170.3-L (45-gal.) deluxe sprayer for Gator utility vehicles
- LP48006 – 341-L (90-gal.) deluxe sprayer for Gator utility vehicles
- LP20853 – 341-L (90-gal.) dual-tank sprayer for Gator utility vehicles
- LP22909 – 341-L (90-gal.) deluxe dual-tank sprayer for Gator utility vehicles
Components included
- Upper dash harness
- Lower dash harness
- Rocker switch (on/off)
- Rocker switch sticker
- Chassis harness
- Sprayer harness
- Hardware (includes zip ties and wire harness clips)
- Installation instructions
Required John Deere parts
- E-Spec Full-Size Gator Utility Vehicles (XUV835E and XUV865E)
- Dash port attachment harness (BM26268)
- E-Spec attachment harness (BM26266)
- M-Spec Full-Size Gator Utility Vehicles (XUV835M and XUV865M)
- Dash port attachment harness (BM26268)
- R-Spec Full-Size Gator Utility Vehicles (XUV835R and XUV865R)
- Dash port attachment harness (BM26268)
Spreaders
10 cu. ft. In-Bed Spreader - 57K7MLP69905
0.3-m3 (10-cu ft) in-bed spreader for XUV835 and XUV865
Overview
The 0.3-m3 (10-cu ft) in-bed spreader easily expands the capabilities and productivity of operators with Gator XUV835 and XUV865 Full-Size Crossover Utility Vehicles. Featuring exclusive controls and ample hopper capacity, these spreaders are the ideal spreading solution to help operators quickly apply large amounts of ice melt materials.
Additional details
The 0.3-m3 (10-cu ft) in-bed spread is compatible with model year 2018 and newer XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R Utility Vehicles.
Specifications |
Measurements |
Length - overall |
183 cm (72 in.) |
Length - spinner removed |
154 cm (60.5 in.) |
Width |
123.2 cm (48.5 in.) |
Height - bottom of spinner to top of hopper |
105 cm (41.4 in.) |
Height - bottom of spreader to top of hopper |
67 cm (26.4 in.) |
Auger diameter |
7.6 cm (3 in.) |
Spinner diameter |
30.5 cm (12 in.) |
Capacities |
Hopper volume - filled to top screen |
0.3 m3 (10 cu ft) |
Spreader weight - hopper empty |
138 kg (305 lb) |
Spreader weight - hopper full |
Varies by material – consult the operator's manual for weight limits |
Materials |
Hopper |
Single-piece polyethylene |
Spinner and frame |
Powder-coated steel |
Top screen |
7.9-mm (5/16-in.) powder-coated steel rod |
Motors - auger, spinner, vibrator |
12-V, semi-sealed |
Operation |
Maximum spreading width |
9.1 m (30 ft) |
Display functions |
- On/off
- Spinner speed
- Auger speed
- Auger reverse
- Auto jam clearing
- Unload mode
- Vibrator mode (low, high, ramp, pulse)
- Diagnostic information
- Auto stop (CAN Bridge required)
|
Warranty |
Residential |
1 year |
Commercial |
6 months |
Benefits
- Easily control the mounted spreader with the 9-cm (3.5-in.) weatherproof, color display. Four push buttons are used to navigate functions including independent adjustment of the auger and spinner speeds, vibratory motor settings, auger reverse to clear out jammed material, and unload mode to completely empty the hopper. The display easily mounts to the vehicle's dash by utilizing existing holes.
- If a controller area network (CAN) bridge (BUC10316) is installed on the utility vehicle, operators can access automatic stop, which halts spreader operation when the vehicle stops moving.
- Enjoy long periods of spreading ice melt materials with the ample volume of the 0.3-m3 (10-cu ft) poly hopper.
- The 7.6-cm (3-in.) diameter steel auger is powered by a direct-drive motor and features variable speed control, automatic jam clearing, and reverse to clear jammed material.
- Quickly cover large areas up to 9.1-m (30-ft) wide using the 30.5-cm (12-in.) diameter steel spinner with independent speed control.
- This entire assembly can be quickly disconnected to access the vehicle's hitch and reduce the spreader's overall footprint for storage.
- Eliminate bridged material inside the hopper with the vibratory motor that features four modes (pulse, low, high, and ramp).
- A top screen and fitted tarp are included to help with material handling. The top screen prevents clumped material from entering the hopper, while the fitted tarp helps keep material dry.
- Get a dedicated, secure fit to the cargo box from the provided mounting hardware. Two stainless-steel tie-down rods secure the spreader to the tie-down hooks in the bed.
17AT Cart - 57K7MLPPCT17ATJD
17AT Cart
-
0.5-m
3 (17-cu ft) capacity
-
453.6-kg (1000-lb) load limit
-
Copolymer polypropylene is compression molded for optimum thickness in all areas and maximum durability
-
Heavy-duty, reinforced structural frame with a 25.4-mm (1-in.) diameter, one-piece axle to handle weight, speed, and bumps
-
Spring-loaded dump latch for easy dumping and positive lock to prevent accidental unlocking when being towed
-
Double-sealed, high-speed roller bearings to handle a 48-km/h (30-mph) maximum speed
-
Heavy-duty polyethylene bed
-
All-terrain knobby tires
-
Provides good flotation and traction in mud, sand, and other wet or soft areas
-
Flexes over bumps and ruts for a smoother, more controlled ride
-
Minimizes ground compaction to save turf and prevent ruts in soft ground
-
Poly fenders to keep the operator, cart, and vehicle clean
-
Suitable for use with most John Deere utility vehicles equipped with a 48-mm (1.875-in.) ball hitch, including Gator™ Utility Vehicle models TX, TX Turf, TH 6x4, TH 6x4 Diesel, all HPX 4x4 models, and all XUV models
-
Quality and styling compatible with other John Deere equipment
Ordering information
Contact your local John Deere dealer for availability and pricing information.
17AT Cart
Order number: LPPCT17ATJD
5 cu. ft. Drop Spreader - 57K7MLP69911
0.14-m3 (5-cu ft) drop spreader
Overview
Whether it's a snow removal contractor, a grounds crew at a college campus, or a municipality working downtown, a drop spreader is a professional's choice for precision spreading. This drop spreader combines a large, 0.14-m3 (5-cu ft) material capacity with a precise 109-cm (43-in.) spread width that's ideal for salting sidewalks. Heavy-gauge stainless-steel construction, simple drives, and an industry-exclusive removable rotor tray make this attachment the ultimate spreading solution.
Benefits
- Enjoy long periods of spreading with the stainless-steel hopper that offers 0.14-m3 (5-cu ft) of material capacity.
- The stainless-steel rotor is segmented to enhance the accuracy of material distribution with the 109-cm (43-in.) spread width.
- Simple, enclosed drives help enhance the spreader's longevity.
- Get perfect, tool-free selection of material flow with a six-position gate.
- Experience an easy, tool-free cleanout from the industry-exclusive removable rotary tray.
- Eliminate material bridging with the vibration motor.
- Enhance productivity with the multipurpose use of the spreader. Use it in the winter to spread ice-melt material and in the summer to apply fertilizer, topsoil, and lime.
Additional details
The 0.14-m3 (5-cu ft) drop spreader is compatible with model year 2018 and newer XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R Utility Vehicles.
To adapt this spreader to a XUV835 or XUV865 Utility Vehicle, the XUV835/XUV865 hitch and display (LP69908) is required.
Specifications:
- Hopper capacity: 159 kg (350 lb), varies by material
- Rotor speed: 1.3 to 6 rpm
- Electrical: 12 V
Fertilzer Spreader - 835/865 - 57K7MLP69910
0.085-m3 (3-cu ft) fertilizer spreader
Overview
The 0.085-m3 (3-cu ft) fertilizer spreader for Gator XUV835 and XUV865 Full-Size Crossover Utility Vehicles is ideal for applying fertilizer, seed, herbicide, and other fine-particle materials. This spreader features a poly hopper with up to 109 kg (240 lb) of material capacity to minimize refilling. After pairing with a Gator hitch and display (LP69908), spread-width adjustments can be made up to 6.1 m (20 ft).
Benefits
- Enjoy long periods of spreading with a poly hopper that offers 109 kg (240 lb) of material capacity.
- Get long-term durability from the stainless-steel, 25.4-cm (10-in.) diameter spinner.
- Control the flow of fine materials through the adjustable gate operated with an electric actuator.
- Control the spread pattern with the side deflector.
- Satisfy heavy-duty spreading demands using the 1/4-kW (1/3-hp), semi-sealed electric motor.
- Improve durability in rugged conditions with a powder-coated steel frame.
Additional details
The 0.085-m3 (3-cu ft) fertilizer spreader is compatible with model year 2018 and newer XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R Utility Vehicles.
To adapt this fertilizer spreader to an XUV835 or XUV865 Utility Vehicle, the XUV835/XUV865 hitch and display (LP69908) is required.
Salt Spreader 835/865 - 57K7MLP69909
0.085-m3 (3-cu ft) salt spreader
Overview
The 0.085-m3 (3-cu ft) salt spreader for Gator XUV835 and XUV865 Full-Size Crossover Utility Vehicles is the convenient spreading solution for applying rock salt in winter weather. This spreader features a poly hopper with up to 109 kg (240 lb) of material-carrying capacity. After pairing with a Gator hitch and display (LP69908), spread-width adjustments can be made up to 7.6 m (25 ft) wide.
Benefits
- Enjoy long periods of spreading with the poly hopper that offers 109 kg (240 lb) of material capacity.
- Easily move large-particle material, like rock salt, to the spinner with the vertical auger.
- NOTE: The spreader is not well suited to handle fine-particle materials like calcium chloride.
- The 25.4-cm (10-in.) diameter, nylon, glass-reinforced spinner withstands corrosive ice melt products for long-term use.
- Satisfy heavy-duty spreading demands with the 1/4-kW (1/3-hp), semi-sealed electric motor.
- Improve durability in rugged conditions with a powder-coated steel frame.
Additional details
The 0.085-m3 (3-cu ft) salt spreader is compatible with model year 2018 and newer XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R Utility Vehicles.
To adapt this salt spreader to an XUV835 or XUV865 Utility Vehicle, the XUV835/XUV865 hitch and display (LP69908) is required.
Spreader Hitch and Display - 57K7MLP69908
Hitch and display for XUV835 and XUV865
Overview
The hitch and display for Gator XUV835 and XUV865 Full-Size Crossover Utility Vehicles are specifically designed to work with a 0.085-m3 (3-cu ft) salt spreader (LP69909), a 0.085-m3 (3-cu ft) fertilizer spreader (LP69910), or a 0.14-m3 (5-cu ft) drop spreader (LP69911).
Each hitch features a spring-loaded mechanism to allow for quick spreader attachment and removal. The hitch can also be lowered to provide easy access for routine service.
This latest generation of utility vehicles offer greater electronic capabilities than ever before. As a result, operators have access to enhanced functionality and controls, which is seen through the 9-cm (3.5-in.) weatherproof, color display.
Benefits
- Easily control the mounted spreader with the 9-cm (3.5-in.) weatherproof color display. Four push buttons are used to navigate functions including independent adjustment of the auger and spinner speeds and activating the vibratory motor on 0.14-m3 (5-cu ft) drop spreaders. The display mounts easily to the vehicle's dash by utilizing existing holes.
- If a controller area network (CAN) bridge (BUC10316) is installed on the Gator, operators will also have access to automatic stop functionality, where spreader operation halts when the vehicle stops.
- Designed specifically for Gator utility vehicles, the hitch ensures safe and secure spreader fitment.
- The powder-coated steel hitch provides the utmost support and durability.
Additional details
The hitch and display are compatible with the following models:
- Model year 2018 and newer XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R
- 0.085-m3 (3-cu ft) salt spreader (LP69909)
- 0.085-m3 (3-cu ft) fertilizer spreader (LP69910)
- 0.14-m3 (5-cu ft) drop spreader (LP69911)
Storage
Label kit for toolboxes (Green & Yellow) - 57K7MBM26220
Large MOLLE Storage pouch - Brown - 57K7MLP74692
MOLLE large storage pouch - black
MOLLE large storage pouch - camo
MOLLE large storage pouch - brown
NOTE: Available through OrderZone.
The large MOLLE storage pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Dual military-grade zippers and pulls
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 127-mm (5-in.) MOLLE sticks included
- Available in black, brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Built-in drain hole
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
MOLLE Device Pouch - Black - 57K7MLP66151
MOLLE device pouch
Available through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
- Velcro flap closure
- Padded to protect device and contents
- Constructed with military-grade Cordura™ fabrics
- Utilizes the MOLLE attachment system
- Pair of 6-in. (152.4-mm) MOLLE sticks included
- Available in black or REALTREE HARDWOODS HD™ pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Built-in drain hole
- Limited 1-year warranty
- Made In U.S.A.
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE Device Pouch - Camo - 57K7MLP66150
MOLLE device pouch
Available through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
- Velcro flap closure
- Padded to protect device and contents
- Constructed with military-grade Cordura™ fabrics
- Utilizes the MOLLE attachment system
- Pair of 6-in. (152.4-mm) MOLLE sticks included
- Available in black or REALTREE HARDWOODS HD™ pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Built-in drain hole
- Limited 1-year warranty
- Made In U.S.A.
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE Fire Extinguisher Pouch - Black - 57K7MLP66153
MOLLE fire extinguisher pouch - black
MOLLE fire extinguisher pouch - camo
MOLLE fire extinguisher pouch - coyote brown
NOTE: Available through OrderZone.
The MOLLE fire extinguisher pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Military-grade rapid extraction clips
- Fits standard round 1.1-kg (2.5-lb) fire extinguishers
- Padded to protect contents
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 15.2-cm (6-in.) MOLLE sticks included
- Available in black, coyote brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
MOLLE Fire Extinguisher Pouch - Camo - 57K7MLP66152
MOLLE fire extinguisher pouch - black
MOLLE fire extinguisher pouch - camo
MOLLE fire extinguisher pouch - coyote brown
NOTE: Available through OrderZone.
The MOLLE fire extinguisher pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Military-grade rapid extraction clips
- Fits standard round 1.1-kg (2.5-lb) fire extinguishers
- Padded to protect contents
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 15.2-cm (6-in.) MOLLE sticks included
- Available in black, coyote brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
MOLLE Large Pouch - Black - 57K7MLP66149
MOLLE large storage pouch - black
MOLLE large storage pouch - camo
MOLLE large storage pouch - brown
NOTE: Available through OrderZone.
The large MOLLE storage pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Dual military-grade zippers and pulls
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 127-mm (5-in.) MOLLE sticks included
- Available in black, brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Built-in drain hole
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
MOLLE Large Pouch - Camo - 57K7MLP66148
MOLLE large storage pouch - black
MOLLE large storage pouch - camo
MOLLE large storage pouch - brown
NOTE: Available through OrderZone.
The large MOLLE storage pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Dual military-grade zippers and pulls
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 127-mm (5-in.) MOLLE sticks included
- Available in black, brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Built-in drain hole
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
MOLLE Small Pouch - Black - 57K7MLP66147
MOLLE small storage pouch - black
MOLLE small storage pouch - camo
MOLLE small storage pouch - brown
NOTE: Available through OrderZone.
The small MOLLE storage pouches are compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Military-grade zippers and pulls
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 127-mm (5-in.) MOLLE sticks included
- Available in black, brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made in the USA
Cordura is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
MOLLE Small Pouch - Camo - 57K7MLP66146
MOLLE small storage pouch - black
MOLLE small storage pouch - camo
MOLLE small storage pouch - brown
NOTE: Available through OrderZone.
The small MOLLE storage pouches are compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Military-grade zippers and pulls
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 127-mm (5-in.) MOLLE sticks included
- Available in black, brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made in the USA
Cordura is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
MOLLE Water Bottle Pouch - black - 57K7MLP74688
Water bottle pouch with three color options
Overview
This water bottle pouch attaches to the backrest of utility vehicle seat covers that use the military-inspired modular lightweight load-carrying equipment (MOLLE) attachment system. The pouch fits up to a 0.95-L (32-oz) wide-mouth bottle.
Benefits
- Military-grade zipper and pull
- Constructed with military-grade CORDURA® fabrics
- Easily attaches with built-in straps
- Customizable with three colors: black, coyote brown, and Realtree EDGE™ camo
- Durable inner liner made of high-density coated pack cloth nylon fabric
Additional details
- Dimensions – 22.9 cm (9 in.) high, 10.2 cm (4 in.) wide, and 10.2 cm (4 in.) long
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America S.a.r.l. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
MOLLE fire extinguisher Pouch – brown - 57K7MLP74673
MOLLE fire extinguisher pouch - black
MOLLE fire extinguisher pouch - camo
MOLLE fire extinguisher pouch - coyote brown
NOTE: Available through OrderZone.
The MOLLE fire extinguisher pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Military-grade rapid extraction clips
- Fits standard round 1.1-kg (2.5-lb) fire extinguishers
- Padded to protect contents
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 15.2-cm (6-in.) MOLLE sticks included
- Available in black, coyote brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
Molle Water Bottle Pouch - Coyote Brown - 57K7MLP74690
Water bottle pouch with three color options
Overview
This water bottle pouch attaches to the backrest of utility vehicle seat covers that use the military-inspired modular lightweight load-carrying equipment (MOLLE) attachment system. The pouch fits up to a 0.95-L (32-oz) wide-mouth bottle.
Benefits
- Military-grade zipper and pull
- Constructed with military-grade CORDURA® fabrics
- Easily attaches with built-in straps
- Customizable with three colors: black, coyote brown, and Realtree EDGE™ camo
- Durable inner liner made of high-density coated pack cloth nylon fabric
Additional details
- Dimensions – 22.9 cm (9 in.) high, 10.2 cm (4 in.) wide, and 10.2 cm (4 in.) long
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America S.a.r.l. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
Molle Water Bottle Pouch - Real Tree - 57K7MLP74689
Water bottle pouch with three color options
Overview
This water bottle pouch attaches to the backrest of utility vehicle seat covers that use the military-inspired modular lightweight load-carrying equipment (MOLLE) attachment system. The pouch fits up to a 0.95-L (32-oz) wide-mouth bottle.
Benefits
- Military-grade zipper and pull
- Constructed with military-grade CORDURA® fabrics
- Easily attaches with built-in straps
- Customizable with three colors: black, coyote brown, and Realtree EDGE™ camo
- Durable inner liner made of high-density coated pack cloth nylon fabric
Additional details
- Dimensions – 22.9 cm (9 in.) high, 10.2 cm (4 in.) wide, and 10.2 cm (4 in.) long
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America S.a.r.l. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
Rapid Recovery Rope Kit - Black - 57K7MLP66162
Rapid recovery rope kit
Available through OrderZone
Special features:
- Extreme off-road kinetic recovery rope and storage bag
- Rope measures 9/16 in. (21 mm) X 20 ft (6.1 m) and is constructed of double-braided nylon
- 5,000-lb (2268-kg) tensile strength
- Bag is constructed with military-grade Cordura™ fabrics with built-in carry handle
- Bag utilizes the modular lightweight load-carrying equipment (MOLLE) attachment system with two 6–in. (152.7-mm) MOLLE sticks included
- Bag available in black or REALTREE HARDWOODS HD™ pattern
- Limited 1-year warranty
- Made In U.S.A.
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
Rapid Recovery Rope Kit - Camo - 57K7MLP66161
Rapid recovery rope kit
Available through OrderZone
Special features:
- Extreme off-road kinetic recovery rope and storage bag
- Rope measures 9/16 in. (21 mm) X 20 ft (6.1 m) and is constructed of double-braided nylon
- 5,000-lb (2268-kg) tensile strength
- Bag is constructed with military-grade Cordura™ fabrics with built-in carry handle
- Bag utilizes the modular lightweight load-carrying equipment (MOLLE) attachment system with two 6–in. (152.4-mm) MOLLE sticks included
- Bag available in black or REALTREE HARDWOODS HD™ pattern
- Limited 1-year warranty
- Made In U.S.A.
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
Small MOLLE Storage pouch – brown - 57K7MLP74714
MOLLE small storage pouch - black
MOLLE small storage pouch - camo
MOLLE small storage pouch - brown
NOTE: Available through OrderZone.
The small MOLLE storage pouches are compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Military-grade zippers and pulls
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 127-mm (5-in.) MOLLE sticks included
- Available in black, brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made in the USA
Cordura is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
Tailgate w/ brake and tail lights for toolboxes - 57K7MBUC10393
Tailgate with brake lights and taillights
This tailgate kit with brake lights and taillights is specifically designed for compatibility with the top and side-door toolboxes (BM26162 and BM26160).
The tailgate can be installed in minutes once the toolbox and tail lights are installed by bolting them to the tailgate bracket.
Optional label kits are designed to fit with this tailgate:
- BM26220 – green and yellow
The tailgate is compatible with the following Gator™ utility vehicle models:
- TX
- TX Turf
- TE
- TH
- XUV625i
- XUV825i/E/M
- XUV825i/E/M S4
- XUV855D/E/M
- XUV855D/E/M S4
- XUV835E/M/R
- XUV865E/M/R
- Model Year 2018 - current HPX615 and HPX815
Top Opening Toolbox - 57K7MBM26162
Top-door opening toolbox
This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.
Top door opening toolbox features:
- 125-L (33-gal.) sealed storage
- Heavy-gauge sheet metal
- D-rings for tie downs
- Fully sealed lockable latch
- Sealed door
- Toolbox divider
- Removable tool tray
- Can be mounted on either side of the cargo box
|
Top door opening toolbox |
Toolbox weight |
32.7 kg (72 lb) |
Toolbox capacity |
32.7 kg (75 lb) |
Toolbox dimensions |
-Tray: 27.4-cm (10.8-in.) long x 21.8-cm (8.6-in.) wide x 7.1-cm (2.8–in.) deep -Left-hand side compartment: 46.2-cm (18.2–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9–in.) tall -Right-hand side compartment: 62.7-cm (24.7–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9-in.) tall -125-L (33-gal.) total volume |
The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.
The toolbox requires the tailgate with brake and tail lights kit BUC10393 and optional label kit:
- BM26220 – green and yellow
This toolbox is compatible with the following Gator™ Utility Vehicle models:
- TX
- TX Turf
- TE
- TH
- XUV625i
- XUV825i/E/M
- XUV825i/E/M S4
- XUV855D/E/M
- XUV855D/E/M S4
- XUV835E/M/R
- XUV865E/M/R
- Model year 2018 and newer HPX615 and HPX815
Underhood storage tub with removable tool tray - 57K7MBUC10167
Underhood storage tub and tray installed in vehicle
Underhood storage tub with removable tool tray
Key features
- Easily installs under the hood in models that do not have heating, ventilation, and air conditioning (HVAC) or the heater kit
- Storage tub has a volume of 21 L (5.5 gal.)
- Rough dimensions: 88.1 cm x 20.3 cm x 38.2-cm deep (34.7 in. x 8 in. x 15-in. deep)
- Removable drain plug
- Removable tool tray
- Dimensions: 45.5 cm x 19.3 cm x 4.6-cm deep (18 in. x 7.6 in. x 2-in. deep)
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Only compatible on these vehicles that do not have HVAC or heater kit installed
Winch
Winch Accessories Kit - 57K7MBM21392
Winch accessories kit
Double the pulling power, change the pulling direction, and keep the winch in proper working order.
The accessories kit is essential gear for operators getting the most out of their winch:
-
Effectively anchors to trees/boulders
-
Change the pulling direction
-
Double the pulling capacity
The accessories kit includes:
-
Flexible tree strap
-
Snatch block
-
Shackle
Each kit comes in a black Cordura® heavyweight-nylon soft case.
Cordura is a trademark of INVISTA.
Winch Kit 4500lb, Winch - 57K7MBUC10682
2041-kg (4500-lb) winch (chassis mounted)
Plug-in remote
Key features
- Impressive pulling capacity of 2041 kg (4500-lb)
- Equipped with a water-resistant contactor that supplies the amperage required for higher pulling capacities
- Includes a 3.05-m (10-ft), water-resistant, plug-in remote for safe distance operation that plugs directly into the glove box
- 15.2 m (50 ft) of 5.6-mm (7/32-in.) synthetic rope with hawse fairlead
- Synthetic rope does not develop sharp burrs like steel rope and does not store as much potential energy when under load
- Ergonomic clutch handle
- Limited lifetime, 3-year electrical (North America) warranty offered through WARN
Compatibility
- Model year 2018 and newer XUV835 and XUV865 Utility Vehicles
- M-spec and R-spec vehicles come from the factory winch ready, and no additional attachment harnesses are required
- Requires winch mounting kit to mount the winch either on the chassis or on the front or rear receiver
- Not compatible with winch mounts BM26252 and BM26393
Electrical harness requirements
XUV835/865 |
Attachment harness required (see below) |
E |
1 |
1 |
E-spec attachment harness |
2 |
Front attachment harness |
3 |
Roof attachments harness |
4 |
Front cab harness |
5 |
Rear cab harness |
6 |
Dash port harness |
WARN is a trademark of WARN Industries, Inc.
Wireless Winch Remote - 57K7MBM26662
Wireless winch remote
Wireless winch remote mounted on XUV835
Key features
- Wirelessly control winch from up to 15 m (50 ft) away
- Weatherproof transmitter has two large buttons, making it easy to operate even while wearing gloves
- Colored light-emitting diode (LED) lights provide clear operator feedback
- Kit includes wireless transmitter, receiver, holster, wiring, and mounting hardware
Compatibility
- Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
- Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Windshield
Abrasion resistant poly full windshield - 57K7MBUC10574
Full poly windshield
Key features
- Easily installs in minutes
- Made from two-sided, abrasion-resistant polycarbonate
- Seals against the occupant protective structure (OPS)
- A rear-panel option is recommended when a full windshield is installed to help keep dust out of the operator station
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Abrasion resistant poly half windshield - 57K7MBM25993
Poly half windshield
Poly half windshield
Key features
- Designed to deflect wind, dirt, and debris over the occupants
- Easily installs in minutes
- Made from two-sided, abrasion-resistant polycarbonate
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Glass Windshield (no wiper) - 57K7MBM26383
Windshield Washer Kit - 57K7MBM26390
Windshield washer bottle
Backlit three-position switch
Washer bottle location behind access panel
Key features
- Wash away dirt and debris with a quick flip of a switch
- Washer bottle conveniently located behind access panel
- Washer fluid comes out of nozzle on wiper arm (windshield wiper kit required)
- Kit includes washer bottle, hose connections, and three-position switch
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements
XUV835/865 |
Attachment harness required (see below) |
E |
1, 3, 4 |
M (open station) |
3, 4 |
M (cab, factory installed) |
--- |
R |
--- |
1 |
E-spec attachment harness |
2 |
Front attachment harness |
3 |
Roof attachments harness |
4 |
Front cab harness |
5 |
Rear cab harness |
6 |
Dash port harness |
Windshield Wiper Kit - 57K7MBM26389
Windshield wiper
Key features
- Clears water and debris off of the windshield for greater visibility
- Single-speed wiper
- Windshield washer ready (sold separately)
- Backlit switch installs into the dash
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements
XUV835/865 |
Attachment harness required (see below) |
E |
1, 3, 4 |
M (open station) |
3, 4 |
1 |
E-spec attachment harness |
2 |
Front attachment harness |
3 |
Roof attachments harness |
4 |
Front cab harness |
5 |
Rear cab harness |
6 |
Dash port harness |