×
Quick Equipment Search 123
Equipment Filter 123










used search tag used search tag

1200A

Bunker & Field Rake


  • Mechanical drive system
  • Less steering effort
  • Standard power lift
  • Adjustable seat

Features

Powerful 13.5 hp (10.1 kW), 401 cc gas engine offers plenty of pulling and pushing power

Raising the hinged rear fiberglass cowling exposes the air-cooled, four-cycle, overhead valve engine. This engine features a powerful 401-cc-cc single-cylinder design, which generates 13.5 hp (10.1 kW)*.

  • High torque for pulling power
  • Fuel efficient for lower operating cost and extended operating range
  • 3.6-U.S. gal. (13.6 L) fuel tank for long hours of operation with leaded or unleaded gasoline
  • Full-pressure lubrication and oil filter for good reliability
  • Low vibration for long component life and operator comfort
  • *At 3600 rpm. Engine manufacturer gross power tested in accordance with SAE J1995. The engine hp and torque information are provided by the engine manufacturer for comparison purposes only. Actual operating hp and torque will be less. Refer to the engine manufacturer’s website for additional information.
Heavy-duty air filter protects engine in tough conditions

A heavy-duty air filter is standard equipment on the 1200A Bunker and Field Rake.  Featuring a cyclone design, this dual element filter can eject 90 percent to 95 percent of dust particles before they reach the paper element core.  This reduces overall maintenance costs through less cleaning and replacement.

Torque converter and transaxle design provides excellent traction and tight turning radius
Drive system Drive system

The torque converter and transaxle design delivers a 164-to-1 gear ratio for excellent pulling and pushing power. The belt from torque converter is permanently engaged, greatly reducing the potential of belt wear. A durable Kanzaki® transaxle with a differential lock allows for increased traction and reliability.

 

The rear differential design allows for the 1200A to turn on a tight 12-in. (305-mm) turning radius for outstanding maneuverability, yielding high productivity.  Speeds are variable in forward and reverse from 0 mph to 12.6 mph (0 km/h to 20.3 km/h), providing excellent raking quality at reduced ground speeds without sacrificing quick transport from bunker to bunker.

 

Kanzaki is a U.S.-registered trademark of Kanzaki Kokyukoki Manufacturing Company.

High flotation tires with low ground pressure to minimize compaction
Knobby tire option Knobby tire option

High flotation tires are inflated to a low 6 psi (41.4 kPa) to minimize ground compaction.  Two tire treads are offered:

  • Knobby is for increased traction in bunkers, two-ply design.
  • Turf is for reduced marking in turf applications, such as spiking greens. This tread is also an excellent choice for baseball applications, four-ply design. 

Both tire options feature a 22.5x10-8 front tire and two 25x12-9 rear tires. 

 

The 41.5-in. (105.4-cm) wheelbase provides good stability on steep inclines.

Operator station design provides comfortable and productive operation
Operator's platform Operator's platform

The operator station for the 1200A Bunker and Field Rake was designed with comfort and productivity in mind. A large 14-in. (35.6-cm) diameter steering wheel with 8.3-to-1 gear reduction ratio provides for easy and responsive steering. An adjustable high back seat with spring cushion reduces operator fatigue. Wide running boards offer comfortable leg support across a wide range of operators.

 

All controls for cultivating and front blade operation are conveniently located to the operator's right hand side. The mechanical linkage design allows for easy operation of both attachments. An electrical lift/lower system for the rear-mounted attachments means effortless lifting and lowering. The switch is located on the dash for the ultimate in ease of use.

Convenient location of all instrumentation and operator controls on front dash for ease of use
Instrumentation and controls Instrumentation and controls

All instrumentation and operator controls are located on the front dash for ease of use and premium visibility.  These include:

  • Hour meter to keep track of service intervals
  • Voltage indicator to monitor for proper charging of the 12-V power circuit
  • Ignition switch on right hand side of the console for quick and easy starting
  • Easy-to-reach optional front light switch, mounted on the left side
  • Choke control on left hand side of console for easier cold starts
  • Easy access to the rear implement lift and lower switch, located on the right side of the dash
Easy-to-use foot controls for efficient operation
Forward and reverse foot control Forward and reverse foot control

The foot control design of the 1200A increases productivity with ease of operation. To change from forward to reverse, a convenient pedal system is located on the left side of the foot platform, allowing for quick and easy engagement with the touch of a toe. 

 

To select the forward gear, simply press the front pedal forward. To switch to reverse, press the rear foot pedal rearward. Neutral position is required for starting, and can easily be located by utilizing the bar welded to the foot platform.

Differential lock Differential lock

Also located to the left side is the lever for the differential lock. Simply engage by pressing down with the left heel. 

 

NOTE:  Differential lock should only be activated when the unit is at a complete stop or damage to the transaxle may occur.

Brake and throttle foot controls Brake and throttle foot controls

The brake engagement is located on the right side of the foot platform.  A foot-activated transaxle disc brake allows for quick and controlled stops. To activate the parking brake, simply step on the brake pedal and engage the retaining lever.  To de-activate the parking brake, simply disengage the retaining lever by pushing forward with the right foot or toe.

 

Also located to the right side of the operator platform is the throttle pedal.  To move the 1200A, simply select the direction of travel on the left hand side, disengage the parking brake, and press on the throttle pedal.  The further the pedal is pushed, the faster you will go. The maximum speed is 12.6 mph (20.3 km/h).

 

NOTE: Revving the engine or failing to brake to a complete stop prior to changing from forward to reverse and vice versa will result in gear clash and may damage the machine.

Specs & Compare

ADD MODEL

Key Specs

1200A
Current Model
Transmission typeBelt-driven torque converter with Kanzaki gear driven transaxle
Ground clearance @ rake attachment241 mm
9.5 in.
Travel Speed (forward or reverse)Variable: 0-20.3 km/h
0-12.6 mph
Tank capacity13.6 L
3.6 U.S. gal.
Displacement401 cc
24.5 cu in.
Engine type4-cycle, air cooled
HorsepowerAt 3600 rpm: 13.5 hp
Engine manufacturer gross power tested in accordance with SAE J1995. The engine hp and torque information are provided by the engine manufacturer for comparison purposes only. Actual operating hp and torque will be less. Refer to the engine manufacturer’s website for additional information.

Engine

Manufacturer
Type4-cycle, air cooled
Displacement401 cc
24.5 cu in.
HorsepowerAt 3600 rpm: 13.5 hp
Engine manufacturer gross power tested in accordance with SAE J1995. The engine hp and torque information are provided by the engine manufacturer for comparison purposes only. Actual operating hp and torque will be less. Refer to the engine manufacturer’s website for additional information.
Compression ratio8:4:1
LubricationFull-pressure
Oil capacity1.3 L
1.4 U.S. qt
Oil filterStandard
Spark arrester mufflerStandard
Idle speedLow speed: 1,175 (+/- 75) rpm
fast speed: 3,100 (+/- 75) rpm

Electrical System

Type12 V
regulated: 13 amp
Battery12 V
38 hour amp
StarterElectric
IgnitionTransistor-type
Light kitAvailable

Fuel System

Tank capacity13.6 L
3.6 U.S. gal.
Fuel pumpDiaphragm-type
Fuel requiredRegular leaded or unleaded gasoline

Transmission

TypeBelt-driven torque converter with Kanzaki gear driven transaxle
Fluid capacity2.3 L
2.5 U.S. qt

Travel Speed

Brakes

Steering

Tires

FrontOne 22.5x10-8, 2 PR high-flotation
RearTwo 25x12-9, 2 PR high-flotation

Dimensions

Width1473 mm
58 in.
Height1041 mm
41 in.
Length1676 mm
66 in.
Wheelbase1054 mm
41.5 in.
Ground clearance @ rake attachment241 mm
9.5 in.
Turning radius305 mm
12 in.
Weight (approx.)263 kg
580 lb
Rear-hitch towing capacity227 kg
500 lb

Attachments

RakeWidth
1981 mm
78 in.
Weight
20 kg
44 lb
Blades
Five-section, bunker or field
Prong rake
Three section, 24 prongs, adjustment: 25-76 mm
1-3 in.
Rear mount, powerlift control
CultivatorWidth
1626 mm
64 in.
Weight
20 kg
44 lb
10 blades, hand control w/ 5-position depth adjustment
Front bladeWidth
1016 mm
40 in.
Height
152 mm
6 in.
Weight
21 kg
46 lb
Optional, hand control with lock-up position
60-in. aluminum front bladeWidth
1524 mm
60 in.
Height
263 mm
10.25 in.
Weight
3.7 kg
8 lb
Articulating front-mount core-removal bladeWidth
1231 mm
48 in.
Height
237 mm
9.25 in.
Weight
10.9 kg
24 lb
Optional, hand control with lock-up position
Wide- and narrow-interval scarifier tines attachmentWidth
Wide - 1606 mm
63.25 in.
Narrow: 1574.8 mm
62
Tines
Wide - 20 tines, length: 89 mm
3.5 in.
Narrow - 35 tines, length: 89 mm
3.5
Mid-mount 64.5-in. (164.9 mm) scraper blade attachmentWidth
1649 mm
64.5 in.
Height
144 mm
5.625 in.
Weight
9.5 kg
21 lb
Rear-mounted 60-in. field finisherWidth
1538 mm
60 in.
Length
355.6 mm
14 in.
Weight
19.5 kg
45 lb
Hydraulic pump packageCouplers
Two female, comply with ANSI ASAE S418 standard
Activation
Switch
Weight
5.2 kg
11.5 lb

Sound Levels

Operator ear
Measuring standard
Attachments installed

Addtitional information

Offers & Discounts

No current offers.

Videos