×
Quick Equipment Search 123
Equipment Filter 123










used search tag used search tag

RC8M

Rotary Cutter


  • Standard safety chain shields
  • Standard stump jumper blade holder
  • 3-point hitch quick-coupler (Category 2)
  • Industry-exclusive Double-Decker™ frame design

Features

What is the best cutter for your job?

NOTE: Only for single spindle and multi-spindle.

 

John Deere rotary cutters lead the way with innovative design, superior performance, and proven durability. Valuable features such as the Double-Decker™ design and Max Flow cutting chamber prevent water and debris from accumulating on the smooth, dome-shaped top deck while the flat bottom deck absorbs the punishment from rocks and stumps.

 

The top deck stays smooth - no dents, no dings, no holes. The internal supports sandwiched between the top and bottom decks are key to the smooth and structure-free Max Flow cutting chamber, while at the same time provide added strength and durability.

 

To help promote safe operation, John Deere rotary cutters are equipped with front and rear safety-chain shields. John Deere rotary cutters continue to advance in value with powerful gearboxes, blade holders, and compatibility with a wide range of tractors.

 

Here are situations when a rotary cutter provides value:

  • Clipping pastures encourages grass growth, optimizing valuable pasture acreage.
  • Cutting grass and stalks helps control insects.
  • Routine cutting keeps weeds from reseeding.
  • It is the most cost efficient way to cut roadsides, parks, cemeteries, airport fields, hydro, gas, and telephone easements, and all other types of open properties.
  • Cutting grass waterways encourages root development and helps prevent erosion.
  • Knocking down stalks such as cotton, corn, or milo speeds up decomposition. This is essential in no-till and minimum-till fields.
  • Clearing out brush.
  • Control undergrowth and grass in orchards, vineyards, and groves.

Decide what model to use based on:

  • The size of the area to mow versus the size of the machine – the bigger the area to mow, the bigger the mower needs to be in order to be efficient during mowing hours. Similarly, the limitation of a small area will guide operators to use a smaller mower.
  • The amount of time and frequency it will be used – for longer hours and more frequency, choose a heavier duty machine.
  • Tractor compatibility – if there is a tractor the operator will be using, look for the tractor compatibility sheet to identify appropriate options.

John Deere rotary cutters are available in two duty-level categories:

  • Mid-duty
    • RC M models are available in 1.5-m (5-ft), 1.8-m (6-ft), 2.1-m (7-ft), 2.5-m (8-ft), and 3.2-m (10-ft).
    • This duty-level category cuts brush up to 50.8 mm (2 in.) in diameter.
  • Heavy-duty
    • RC R models are available in 3.2-m (10-ft) and 4.2-m (14-ft).
    • This duty-level category cuts brush up to 76.2 mm (3 in.) in diameter.
    • RC6R is available in 1.8-m (6-ft) and the RC7R is available in 2.1-m (7-ft) cut widths; they cut brush up to 101.6 mm (4 in.) in diameter.

NOTE: R Series are heavier built to cut at a 101.6 mm (4 in.) capacity level more frequently and for longer durations.

Double-Decker™ frame design
Cross-section of patented Double-Decker design Cross-section of patented Double-Decker design

The Double-Decker design provides strength and superior cutting performance while reducing top deck rust. Two welded decks, each 3-mm (1/8-in.) thick, form the upper and lower surfaces of the rotary cutter frame.

 

Internal stiffeners are sandwiched between the two decks, providing superior strength and rigidity.

 

The top deck is domed. Water, grass, and crop debris tend to roll off the deck, reducing water buildup and deck rust. The domed shape and smooth profile of the top deck also make the deck easier to clean when trash does build up in adverse conditions.

Unobstructed horizontal bottom deck Unobstructed horizontal bottom deck

The bottom deck is the main defense against rocks and field debris. Therefore, the top deck is continuously protected from impacts and tends to retain its smooth form.

 

Because the stiffeners are located between the two decks, the underside of the bottom deck is perfectly smooth; there are no structural frame members to interrupt airflow. This improves both cutting performance and distribution.

 

Standard material flow deflectors help channel the cut material, further improving material distribution.

Driveline with slip clutch helps protect it against overloads
Rubber element driveline with chain couplers Rubber element driveline with chain couplers

Rubber element connecting drivelines help absorb the sudden stress of impact loads. Chain couplers are used to maintain the driveline alignment.

Slip-clutch driveline Slip-clutch driveline

A non-seize slip clutch used between the primary gearcase and power take-off (PTO) helps protect the driveline. Slip clutches feature a spring-compression adjustment used to ensure clutches are not seized.

Lift-type and semi-mount models feature an ASAE Category 4 driveline for added durability.

Equal-angle driveline Equal-angle driveline

The pull-type model uses an equal-angle driveline for smoother, rattle-free turns.

A lightweight driveline with a lock-slide collar makes it fast and easy to attach.

The driveline provides long lubrication periods; a 50-hour cycle reduces maintenance time, making the cutting operation more efficient.

Safety chain shields are standard
Front safety chains (RC8M shown) Front safety chains (RC8M shown)
Rear safety chains (RC8M shown) Rear safety chains (RC8M shown)

Front and rear chain shields are standard equipment:

  • Offer protection during operation yet allow uncut material to pass into the cutting chamber with minimal restriction
Standard stump jumper blade holder provides protection against impacts

Round-pan blade holders (stump jumpers) are provided as standard equipment on most John Deere rotary cutter models. Stump jumpers increase the drivetrain reliability by providing protection against impacts such as stumps, rocks, and other obstacles.

Warranty
Five-year limited gearbox warranty provided on every John Deere rotary cutter
Five-year warranty on all flex-wing gearboxes Five-year warranty on all flex-wing gearboxes
Five-year warranty on all rotary cutter gearboxes Five-year warranty on all rotary cutter gearboxes

John Deere is so confident in the reliability of the gearbox that rotary cutters come with a 5-year limited gearbox warranty.

 

There is also 1-year warranty on the complete machine, including drivelines, clutches, and many other components.

Specs & Compare

ADD MODEL

Capacity

RC8M
Current Model
Cutting width2,450 mm
96 in.
Cutting height25 to 305 mm
1 to 12 in.
Cutting capacity50 mm
2 in.
Cutting chamber Depth216 mm
8.5 in.

Tractor compatibility

Tractor PTO HP rangeMinimum PTO pull-type, semi-mount, semi-mount hydraulic offset 30 kW
40 hp
Minium PTO lift-type 37 kW
50 hp
Tractor PTO540 rpm

Hitch

TypePull-type, lift-type, semi-mount, semi-mount hydraulic offset (Pull-type has standard 10,000 lb; 4536 kg, safety tow chain)
Category2, 3, 3N

Dimensions

Transport width2,580 mm
102 in.
Overall width2,580 mm
102 in.
Overall length2,810 mm
111 in.
Deck shapeDomed
Deck typeDouble decker
Deck thicknessUpper
3 (11) mm
0.125 (11) in.
Lower
3 (11) mm
0.125 (11) in.
Side skirt thickness4.5 (7) mm
0.177 (7) in.
Approx. weight759 kg
1,670 lb

Drivelines

SizeMain
ASAE Category 4
ProtectionMain
Non-seize, slip-clutch driveline, pull-type has equal-angle Category 4 driveline
Connecting
Shock absorbing shafts

Gearcases

Number3
HP ratingTransfer
Continuous 89 kW
120 hp
Peak 97 kW
130 hp
Outer
Continuous 56 kW
75 hp
Peak 75 kW
100 hp

Blades

Thickness13 mm
0.5 in.
Width102 mm
4 in.
TypeSuction
Overlap72 mm
2.8 in.
Blade tip speed540 RPM
4,797 m/min
15,739 fpm
288 km/h
179 mph
Material flow systemMax flow
HolderType
Round stump jumper

Wheels

TypePuncture proof laminated (Pull-type has severe-duty Ag tire option)
Row width adjustmentYes, pull-type only

Shielding

FrontChain
RearChain

Additional information

Key Specs

Blade tip speed - 540 rpm
Cutting capacity
Cutting width
Deck thickness - Upper - Lower
Drivelines - Size - Main
Hitch - Category
Protection - Main
Shielding - front/rear
Side skirt thickness
Tractor PTO HP range

Offers & Discounts

No current offers.

Accessories & Attachments



Miscellaneous

Cat. I Hitch Pin - W46672

Two required. Also requires (2) M72431 and (2) A15146.

Cylinder Stops - AW31553
Front Safety Shield - BW14467
Front safety chain shield Front safety chain shield
Rear safety chain shield Rear safety chain shield
 

Safety shields are used to reduce the hazard of thrown material.

 

Front chain shields protect the operator, yet still allow uncut material to pass into the cutting chamber with minimal restriction.

 

Front and rear shields are to be used at all times. They are especially critical when working near roads or other public areas.

Lighting Kit (Tractor must have 7-Pin Electrical Outlet) - BW14472
Warning light Warning light

Recommended for use when transporting and tractor flashing lights are obscured by the implement. Tractor must have 7-pin electrical outlet.

 

Includes:

  • Left and right lights
  • Brackets
  • Wire harness
  • Instructions

 

Note: Warning lights are standard equipment on HX14 Rotary Cutter.

Rear Safety Shield - BW15254
Front safety chain shield Front safety chain shield
Rear safety chain shield Rear safety chain shield
 

Safety shields are used to reduce the hazard of thrown material.

 

Front chain shields protect the operator, yet still allow uncut material to pass into the cutting chamber with minimal restriction.

 

Front and rear shields are to be used at all times. They are especially critical when working near roads or other public areas.

SMV Emblem and Support - BW00381
SMV emblem and support SMV emblem and support
#

Use SMV emblem to provide additional warning of slow-moving equipment.

Skid Shoe (Weld On) - W45401

Videos