×
Quick Equipment Search 123
Equipment Filter 123










used search tag used search tag

610

Integral Chisel Plow


  • Offers a variety of sizes
  • Implement warning lights enable safe transport
  • Shovels and attaching hardware
  • Sweeps and attaching hardware

Features

Offers a variety of sizes and excellent residue flow
610 Chisel Plow 610 Chisel Plow

 

The 610 Chisel Plow is available in a variety of sizes to help match tractor horsepower and work designs.

 

 

Model

Width

Type of fold

Standards

Three-bar integral 2.44 m to 6.10 m
(8 ft to 20 ft)
Non-fold Rigid
      TruPosition™
      Tru-Depth™

 

Typical percents of the residue cover that remains from the 610 are listed as follows (the percentages do not take into account variables such as the condition of the residue, speed, and soil type):

 

 

Starting residue cover (percent)

Remaining non-fragile* residue cover (percent)

Remaining fragile** residue cover (percent)

 

with
406-mm
(16-in.) sweeps

with
51-mm
x
356-mm
(2-in. x 14-in.) chisel point

with
102-mm x
368-mm
(4-in. x 14.5-in.) shovel

with
76-mm
x
610-mm
(3-in. x 24-in.) shovel

with
406-mm
(16-in.) sweeps

with
51-mm
x
356-mm
(2-in. x 14-in.) chisel point

with
102-mm
x
368-mm
(4-in. x 14.5-in.) shovel

with
76-mm
x
610-mm
(3-in. x 24-in.) shovel

100

80

70

60

60

55

50

45

45

90

72

65

55

55

50

45

40

40

80

65

56

50

50

45

40

35

35

70

55

50

42

42

38

35

30

30

60

50

42

35

35

33

30

27

27

50

40

35

30

30

27

25

22

22

40

32

28

25

25

22

20

18

18

*Non-fragile residue includes crops like corn, sorghum, wheat (more than 45 bu).
**Fragile residue includes crops like soybeans, edible beans, peas, wheat (under 45 bu), sunflower, peanuts, cotton.

Strong mainframe withstands demanding field conditions
610 rigid frame 610 rigid frame

The 610 Chisel Plow features a large 102-mm x 102-mm (4-in. x 4-in.) tubular steel mainframe.

 

Welded construction adds the inner strength that withstands twisting and pulling through demanding field conditions.

Choice of rigid, TruPosition™, and Tru-Depth™ standards
Rigid standard Rigid standard

The rigid standard:

  • Is in base equipment on three-section models
  • Is 32 mm x 51 mm x 711 mm (1.25 in. x 2 in. x 28 in.)
  • Design is suited for fields having few obstructions
  • Will till to 203 mm (8 in.) deep
  • Good clearance to handle heavy trash
    • 711-mm (28-in.) underframe
    • 305-mm (12-in.) spacing
TruPosition standard TruPosition standard

The TruPosition standard:

  • Is optional on all models
  • Cast pivot assembly holds shank firm while working in the soil
  • Is 32 mm x 51 mm x 711 mm (1.25 in. x 2 in. x 28 in.)
  • Shank is replaceable without disassembly of the standard assembly
  • Trip action is suited for fields having rocks or other obstructions
    • 550-lb trip 711-mm (28-in.) standard will till to 203 mm (8 in.) deep
    • 711-mm (28-in.) underframe
    • 305-mm (12-in.) spacing
    • Trip height of 254 mm (10 in.) for good clearance
  • Slotted lower hole to aid in removing ground-engaging tools
Tru-Depth standard Tru-Depth standard

The Tru-Depth standard:

  • Is optional on drawn rigid and select drawn flexible models up to 838 mm (33 ft)
  • Is 51 mm x 32 mm x 813 mm (2 in. x 1.25 in. x 32 in.); edge is bent for extra strength
  • Designed to work in rocky ground and heavy draft conditions
    • Will till to 305 mm (12 in.) deep
    • Trip height of 279 mm (11 in.)
    • 568-kg (1250-lb) trip force
  • Excellent clearance to handle heavy trash
    • 813-mm (32-in.) underframe
    • 305-mm (12-in.) spacing
Implement warning lights enable safe transport

An implement warning light harness with a turn-signal module for two amber and two red lights are included as standard equipment for safe transport on roads.

The implement warning light harness requires one of the following:

  • Category 2, 3-point hitch with or without Quik-Coupler
  • Category 3 and 3N, 3-point hitch with or without Quik-Coupler
Horsepower requirements
The rigid and TruPosition™ standards require engine horsepower of 6 hp per ft to 10 hp per ft.

 

The Tru-Depth™ standard requires engine horsepower of 6 hp per ft to 14 hp per ft.

Operator's manual storage container comes as standard equipment
Operator's manual storage container Operator's manual storage container
#

A 102-mm (4-in.) diameter container provides storage to give the operator easy access to the manual at the front of the machine. It is made out of a durable polyethylene and will keep the manual clean and dry in all weather conditions.

 

The container was designed exclusively for John Deere and the John Deere logo is shown on the lid.

Three-bar coil-tine harrow attachment available to finish off the field
Harrow Harrow
#

A handy three-bar coil-tine harrow attachment fits compactly behind the chisel plow.


There is 305 mm (12 in.) of fore-aft clearance between the bars plus vertical clearance of 305 mm (12 in.).

NOTE:  Use the harrow attachment only on machines equipped with sweeps; do not use with the 
Tru-Depth™ standard.

Specs & Compare


Fold

610
Current Model

Working widths

Rigid frameOption 1
2.44 to 6.1 m
8 to 20 ft
Drawn rigid fold
3-section
5-section

Transport width

Rigid frameOption 1
2.99 to 5.97 m
9.83 to 19.58 ft
Drawn rigid fold
3-section
5-section

Transport height

Rigid frame
Rigid over-center fold
3-section
5-section

Operation depth

Operating speed

Horsepower required

Depth control

Option 1Tractor 3-point hitch
Option 2
Option 3

Hydraulic requirements

Standard
Option 1
Option 2

Electrical requirements

Standard
Option 1
Option 2

Hitch

Frame

TubingHigh strength, box beam steel cross members: 10.2x10.2 cm
4x4 in.
Steel end tubes, welded construction: 5.1x10.2 cm
2x4 in.
Number of ranks
Fore-and-aft182.9 cm
72 in.
Underframe clearanceRigid and TruPosition™ standards: 71.1 cm
28 in.
Tru-Depth: 81.3 cm
32 in.

Standard spacings

Standard options

Option 1Spec
3.2x5.1x71.1 cm
1.5x2x28 in.
Maximum operating depth
20.3 cm
8 in.
Underframe clearance
71.1 cm
28 in.
Spacing
30.5 cm
12 in.
40.6 cm
16 in.
Rigid standard
Option 2Spec
3.2x5.1x71.1 cm
1.25x2x28 in.
Trip force
249.5 kg
550 lb
Trip height
25.4 cm
10 in.
Maximum operating depth
30.5 cm
12 in.
Underframe clearance
71.1 cm
28 in.
Spacing
30.5 cm
12 in.
Standard: TruPosition
Option 3Spec
5.1x3.2x81.3 cm
2x1.25x32 in.
Trip force
567 kg
1,250 lb
Trip height
27.9 cm
11 in.
Maximum operating depth
30.5 cm
12 in.
Underframe clearance
81.3 cm
32 in.
Spacing
12, 16
Standard: Tru-Depth
Option 4

Ground-engaging components

Wheels

Centerframe depth control wheels and tires
Wing frame wheels and tires
Stabilizer wheelsOption 1
Stabilizer wheel frames with 5.90 - 15 4PR implement tires (optional on 2.4-m [8-ft] base models, standard on 4.9-m [16-ft] base models)

No basket harrows

Option 1Rank spacing
30.5 cm
12 in.
Spike/coil dimensions
30.5 cm
12 in.
3-bar coil tine
Option 2
Option 3

Rolling basket harrow

Option 1
Option 2
Option 3

Rear hitch

Tubing size
Telescoping
Tongue weight rating
GVW
Wiring harness for transport lights
Hydraulic hoses and couplers

Warranty

Additional feature

Opton 1
Option 2
Option 3
Option 4
Option 5

Additional information

Key Specs

Horsepower per foot
Maximum depth
Miles per hour
Standard spacings - Inches
Transport width -Rigid frame
Working widths - Rigid frame

Offers & Discounts

No current offers.

Videos