×
Quick Equipment Search 123
Equipment Filter 123










used search tag used search tag

TM51 Series

Tandem Disk Harrows


  • Dual wheels provide consistent disking depth
  • Hydraulic wing control
  • Two-blade taper creates level soil surface
  • Transport locks provide secure transport

Features

Dual wheels provide consistent disking depth
Distributes weight evenly during transport Distributes weight evenly during transport
#

The TM51 Series Tandem Disk Harrow comes standard equipped with dual wheels for consistent disking depth.

 

The dual wheels provide additional stability for even weight distribution during transport.


NOTE: TMD5129 and TM5132 have 12 wheels total; six on the center section and three on each of the wing sections.

End washers and wrenches keep gang shaft end nut tight
Keeping gangs tightened increases wear life Keeping gangs tightened increases wear life
Gang nut wrenches are always there when needed Gang nut wrenches are always there when needed

End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life. 

 

Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.  

Hydraulic wing control
Hydraulic wing control and gauge Hydraulic wing control and gauge

Hydraulic wing control is standard equipment on all Frontier™ TM51 Series Tandem Disk Harrows. A control valve allows varying hydraulic pressure to the wing-fold cylinders. It transfers weight from the mainframe to the wings to improve penetration in hard ground and/or heavy soils. Increasing pressure to the rod end of the cylinder holds the wing level to prevent gouging in soft or moist soils.

 

The pressure relief feature allows wings to flex over obstacles to help prevent damage to the cylinder rod. Convenient knob adjustment can be easily reached from the front of the disk. The indicator gauge provides the operator with a quick visual indication of the results of the adjustment.

 

NOTE: Requires a tractor with closed-center hydraulics. Operators must follow special operating instructions per the operator's manual.

Oil-bath disk gang bearings provide extended wear life
Consistent lubrication and longer life Consistent lubrication and longer life

Oil-bath disk gang bearings with a standard wear plate allow consistent lubrication and prolong bearing life with minimal maintenance. 

 

This feature ultimately saves both time and money.

Overlapping front gangs eliminate need for middle breaker
Provides more level soil profile Provides more level soil profile

The front gangs overlap, eliminating the need for a middle breaker. 

 

This provides a more-level soil profile, ensuring complete coverage on each pass.

Standard pintle hitch ensures a solid pull of disk
Pintle hitch Pintle hitch

Safely transport the TM51 Series Tandem Disk Harrow from the farm to the field easily with the standard pintle hitch.

Two-blade taper creates level soil surface
Two-blade taper Two-blade taper

A two-blade taper, including the furrow filler on the outside rear wing, reduces outside ridges and smooths out the soil to create a level soil surface.

Transport locks provide secure transport
Secure locking when transporting Secure locking when transporting

Transport locks secure the unit for transport mode.

Transport width
Two separate control arms create consistent performance
Controls arms level in ground and during transport Controls arms level in ground and during transport

Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground.  

 

Once set for a given soil condition, the disk will continue to perform with consistency.

Specs & Compare


Offers & Discounts

No current offers.

Videos



Model

Working Width

PTO HP OR Drawbar

Weight / Disk

Disk Quantity

TM5118

18 ft. (5.5 m) folding

160-180 HP (119.3 – 134.2 kW)

369 lb. (167.4 kg)

46

TM5120

19 ft. 6 in. (6.1 m) folding

170-200 HP (127 – 149.1 kW)

345 lb. (157 kg)

50

TM5121

21 ft. (6.4 m) folding

190-210 HP (142 – 157 kW)

322 lb. (146.1 kg)

54

TM5124

23 ft. 6 in. (7.3 m) folding

220+ HP (164+ kW)

320 lb. (145.1 kg)

58

TM5129

29 ft. (8.8 m) folding

260+ HP (194+ kW)

314 lb. (142.4 kg)

74

TM5132

32 ft. (9.8 m) folding

280+ HP (209+ kW)

309 lb. (140.2 kg)

82