Our Price:
The S240 Tractor has a large 44.3-cu in. (726-cc) displacement engine with premium features that provide superior performance and reliability:
The 21.5-hp (16-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:
The engine speed lever and choke control lever are separate controls:
Engine hood opens wide for easy access to service points:
The 42-in. (107-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds or in tall grass:
Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:
Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of recutting so more power is available to process incoming grass:
Large discharge opening is both high and wide to handle more material:
The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:
Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:
An optional 6.5-bu (229-L) cut-and-throw rear bagger material collection system (MCS) is available and comes with bagging blades. Special blades are not required but they can be installed for enhanced performance.
The bagger provides an efficient means of collecting grass clippings and leaves. It can be set up without tools in minutes and has easy-to-empty bags.
A wash port is provided to make cleaning the underside of the mower deck easy.
The 42A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:
Mower wheels are double captured:
Low-tension belt-drive design reduces the side load on the engines lower bearing and mower deck bearings for longer life.
Rolled outer edge of the deck provides extra strength and protection.
Dual-stage E-coat and powder-paint coatings provide extra protection from rust.
The 42A Mower Deck is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:
High-lift bagging blades are included with the bagger chute. They provide optimum performance when bagging in difficult conditions, such as when the grass is moist, dense, or long:
Mulching blades are included with the optional MulchControl system. They can be used for mulching, side discharging, and bagging in most conditions.
Mower blade use chart
Mode(s) of operation | Mower blade |
Side discharging mode only | Side-discharge blade (shipped with mower) |
Bagging mode only | Bagging blade (shipped with rear bagger) |
Mulching mode only | Mulching blade (shipped with MulchControl) |
Side discharge and mulching | Mulching blade (shipped with MulchControl) |
Side discharge and bagging | Bagging blade (shipped with rear bagger) |
Side discharge, mulching, and bagging | Mulching blade (shipped with MulchControl) |
The optional MulchControl system makes mulching more practical for many mowing situations because it not only does an excellent job of mulching, but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:
MulchControl is an innovative, simple design that is easy to use and maintain:
MulchControl is well-suited to the following mowing situations:
MulchControl puts the operator in control of the clippings.
While in the side-discharge mode, MulchControl still mulches about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
When bagging with MulchControl on a 48A mower deck, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower runs without material when the baffle is closed.
When bagging with MulchControl on a 42A mower deck, the cut-and-throw rear bagger can be used with the MulchControl blades. However, the rear MulchControl baffle (A) needs to be removed to install the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.
Each MulchControl system is an optional field-installed attachment and includes everything needed for handle actuation: baffles, handle, and mulch blades.
Attachment |
Description |
Applications |
42-in. (107-cm) Accel Deep MulchControl |
S220 and model 2021 and newer S240 Lawn Tractors |
|
48-in. (122-cm) Accel Deep MulchControl |
S240 Lawn Tractor, model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak™ Mowers |
An exclusive 3-year or 200-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere 200 Series Tractors.
*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.
A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy.
Side-by-side foot pedals control the speed and direction of travel:
Appropriate transmissions are used in each tractor model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:
Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Mfg. Co., Ltd.
An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.
Equipment available for snow removal includes:
The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.7-mm) steel:
The S240 comes with premium Turf Trac tires for superior traction and appearance: A more rounded profile reduces lawn scuffing and steering effort.
The front axle is constructed of solid cast iron that will not bend:
The front bumper provides additional front-end protection and attractive, bold style.
The CargO Mount system is a combination of front and rear mounting points that provide convenient and easy installation of the rear bagger and other attachments.
The operator station is designed for operator comfort and easy operation:
Operator comfort is enhanced with a 15-in. (38-cm) high-back, two-piece seat with an open back:
The seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank:
The beverage holder and storage compartment, located on the right fender, add value and operator convenience.
Fender flares cover the tires more completely and add style to the tractor. Handgrips give extra comfort for the operator, especially when operating on hillsides. Reflectors make the tractor more visible.
Three-spoke steering wheel for greater operator comfort and control:
The contoured dash has clean, attractive styling:
The engine speed lever and choke control lever are separate controls:
The mower deck is engaged with an easy-to-use electric PTO switch:
The easy-read fuel gauge shows how much fuel is in the tank and can be seen on the dashboard:
Side-by-side foot pedals control the speed and direction of travel:
Cruise control is standard equipment:
The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.
A spring-assisted, ergonomically designed lift lever simplifies adjusting the mower cut height:
CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:
NOTE: Backing up while the mower is engaged is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.
NOTE: If the mower or other attachment stops while repositioning the machine, return the attachment engagement switch to the off position. Start engine and engage mower. Begin again with step 2.
The one-piece hood opens easily to permit checking and servicing the engine:
The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.
The seat tilts up and out of the way to make adding fuel easy.
The 200 Series Tractor are covered by a 3-year/200-hour bumper-to-bumper warranty*:
*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.
John Deere riding lawn mowers are supported by owner information web pages that include links to:
To speed access to owner information web pages, a QR code is printed onto a PIN label located near the fuel fill. Since each vehicle model has its own web page, the links are specific to the owner’s model. The QR code also includes the vehicle’s unique PIN which allows for additional customization of the owner information web page in the future.
Keep a mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the mower’s barcode to get custom information about the mower.
To download the free MowerPlus app, visit the Apple® App Store® or Google Play™ store.
MowerPlus connectors (sold separately)
Three MowerPlus connectors are available to transmit vehicle information to the MowerPlus app.
BUC10510 MowerPlus Hour Meter Connector is for use with:
BUC10929 MowerPlus Deluxe Smart Connector is for use with:
BUC10537 MowerPlus Smart Connector is for use with:
All the MowerPlus connectors transmit engine hour information to the app, making it easy to track maintenance intervals. The MowerPlus Smart Connector and MowerPlus Deluxe Smart Connector also transmit the fuel level.
MowerPlus connectors require the MowerPlus app on a mobile device to use. The John Deere MowerPlus app and operating system requirements can be found in the mobile device’s app store. The MowerPlus app is only available in the English language, and it is not available in all countries. BUC10510 MowerPlus Hour Meter Connector requires iOS® version 10 or higher and is not compatible with Android™ operating systems.
Apple and App Store are trademarks of Apple, Inc. Google Play and Android are trademarks of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.
Key Specs | S240 Current Model |
Engine power | 21.5 hp 16.0 kW |
Oil change | No-tools oil drain with replaceable filter |
Engine manufacturer/model | FR651V |
Transaxle type | K46 heavy-duty hydrostatic, two-wheel drive |
Transaxle control | Side-by-side pedals |
Rear tires | 20x10-8 |
Lift system type | Spring-assisted hand-grip lever |
Cutting width | Accel Deep™ mower deck, 42 in. 107 in. |
U.S. warranty | 3-year/200-hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Engine | |
Power | 21.5 hp 16.0 kW |
Displacement | 44.3 cu in. 726 cc |
Manufacturer/model | FR651V |
Type | Overhead valve, full-pressure lube, oil filter |
Cylinders | V-twin, cast-iron liners |
Governor | Mechanical |
Choke/speed control | Separate levers, automatic choke return |
Cooling method | Air |
Air cleaner | Dry, replaceable |
Oil change | No-tools oil drain with replaceable filter |
Fuel system | |
Type | Gasoline |
Fuel delivery | Pulse pump and carburetor |
Fuel gauge | Easy-read on dash |
Fuel tank location | Rear |
Fuel fill opening | Center, 1.75 in. 4.45 cm |
Fuel tank capacity | 2.4 U.S. gal. 9.1 L |
Electrical system | |
Battery | 12 V 300 CCA |
Charging system | Flywheel alternator, regulated, 12 amp |
Engine starter | Bendix type |
Hour meter | Yes |
Headlights | Two standard, incandescent |
Taillights or reflector | Reflectors |
Backup lights | No |
Rear work lights | No |
12-V outlet | No |
Transaxle | |
Type | K46 heavy-duty hydrostatic, two-wheel drive |
Control | Side-by-side pedals |
Cruise control | Standard |
Oil cooler | Fins and fan on transaxle |
Oil filter | Internal, not replaceable |
Differential lock | No |
Forward speed | 0-5.5 mph 0-8.9 km/h |
Reverse speed | 0-3.2 mph 0-5.2 km/h |
Brakes | Internal wet disk |
Chassis | |
Frame | Full-length welded steel |
Primer/paint | E-coat/powder |
Weight bracket | Optional rear |
Receiver hitch | No |
Front axle | Cast iron front axle, front wheel sealed ball bearings |
Spindle bushings | No |
Front tires | 15x6-6 |
Rear tires | 20x10-8 |
Hood material | Molded-in color material reduces sound, will not rust or dent |
Fender deck material | Stamped steel |
Floor mats | Yes, with debris removing channels |
Storage | Storage tray with cover |
Service interval decal | Yes |
Fender handles/grips | Handgrips |
Cup holder | Yes |
Equipment mounting | CargO Mount™ system |
Maximum towing capacity | 500 lb 227 kg |
Steering | |
Type | Sector and pinion with single drag link and tie rod |
Four-wheel steer | Not available on this model |
Steering wheel | Deluxe, diameter - 14 in. 35.6 cm |
Tilt steering wheel | No |
Turning radius | 18 in. 45.7 cm |
Uncut circle radius | With 42A: 24 in. 61 cm |
Seat | |
Type | Open-back design with grasp |
Seat back height | 15 in. 38.1 cm |
Armrests | No |
Fore-aft adjustment | While seated, 5.5 in. 14 cm |
Seat suspension | Tilt, two rubber isolators |
Lift system | |
Type | Spring-assisted hand-grip lever |
Hydraulic outlets | No |
Mower cut height | 13 positions, 1-4 in. 2.5-10.2 cm |
Cut height increments | 0.25 in. 0.64 cm |
Preset cut height | No |
Mower deck | |
Type | Side discharge |
Cutting width | Accel Deep mower deck, 42 in. 107 cm |
Construction | Stamped steel deck shell |
Mower deck material | Steel, 13 gauge 0.090 in. 2.3 mm |
Mower wash port | Yes, with hose end |
Mower drive system | Electric power take-off (PTO) clutch |
Mower wheels | Two |
Mower wheel adjustment | One bolt |
Mower level adjustment | Easy-level deck |
Mower attachability | |
Type | Slide under tractor |
Front draft arms | One spring clip |
Rear draft arms | Two spring clips |
Mower wheels rotate | No |
Drive system | Single V-belt |
Safety | |
Meets ANSI standard | Yes |
Meets OPEI standard | Yes |
Backup protection | Reverse Implement Option (RIO) |
Safety video | Yes |
Buyer's notes | |
Notes | Molded-in color material reduces sound, will not rust or dent Durable primer and powder paint finish Large, 14-in. (36-cm) steering wheel for more comfortable operation |
Warranty | 3-year/200-hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Optional equipment | |
Mowers | |
Rear bagger | 2-bag, 6.5 bu 229 L |
Powered material collection | |
Mulching system | Yes, MulchControl™ |
Front thatcher | |
Front blade | 46 in. 116.8 cm |
Mid-mount blade | |
Snow blower | Two-stage, 44 in. 111.8 cm |
Rotary broom | |
Rotary tiller | |
Sleeve hitch | |
3-point hitch | |
Rear power take-off (PTO) | |
Plow, moldboard | |
Box scraper | |
Cultivator | |
Rear blade | |
Disk harrow | |
Landscape rake | |
Sprayer | Tow-behind only, 15 U.S. gal. 56.8 L Tow-behind only, 25 U.S. gal. 94.6 L |
Spreader | Tow-behind only, 125 lb 57.7 kg Tow-behind only, 175 lb 79.4 kg |
Front bumper | Included |
Brush guard | |
Weather protection | Weather enclosure |
Sun canopy | Sun canopy |
Rear receiver hitch | |
Bucket holder | Yes, single bucket |
Grass striping | Lawn striping kit |
Tractor shovel | |
Front loader | |
Other equipment | |
Tow-behind tools | 16 |
Dimensions | |
Height | 45 in. 1143 mm |
Overall length | 75.1 in. 1908 mm |
Wheelbase | 48.9 in. 1242 mm |
Width with mower | 50 in. 1270 mm |
Width with mower (deflector raised for storage) | 49 in. 1244 mm |
Width without mower | 39.4 in. 1000 mm |
Weight | 486 lb 220 kg |
Additional information | |
Manufacturing location | Greeneville, Tennessee, USA |
Date collected | 3-Oct-22 |
Deck Options: